Bedienungsanleitung Arcam DiVA AVR100 (Seite 11 von 17) (Deutsch, Englisch, Französisch)

578766

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

AVR100

English

VOLUME control

To adjust the volume level of the loudspeakers, pre-amp outputs

and headphones use the VOLUME control. The volume level is

shown in the display while it is being adjusted. Three seconds

after the volume is adjusted, the display reverts to show the

selected input.

Note that different sources may require different settings of the

VOLUME control to achieve the same perceived volume level.

The volume can be controlled from 0dB over 80 steps.

BASS and TREBLE controls

Turn the bass and treble controls clockwise to boost response

or anticlockwise to cut response. For a ﬂ at response leave the

controls in the 12 o’clock ‘notched’ position.

Pressing the

DIRECT button bypasses the bass and treble

controls and gives a small improvement to sound quality. If

you do not wish to alter the bass or treble controls, we

recommended that you select DIRECT.

MHz

STEREO

SPEAKERS

VIDEO 1

RDS INFO

FM MUTE/

MONO STORE

PRESET/

TUNE DOWN/UP

Tuning to a station

Pressing the PRESET/TUNE button toggles between the two

tuning modes of the unit – ‘Preset’ or ‘Tune’. The selected mode

is brieﬂ y shown in the display.

Preset mode

In Preset mode, press the

•

and

•

buttons on the front panel

(or P– or P+ on the remote control handset) to cycle up and

down the preset stations.

See ‘Storing a preset’ and ‘Deleting unused presets’, below.

Tune mode

In Tune mode:

■ Press the

•

and

•

buttons on the front panel (or P– or

P+ on the remote control handset) for longer than half-a-

second to engage automatic tuning. The tuner searches

for a radio station signal of sufﬁ cient strength and stops.

To skip to the next station, press one of the buttons

again. Automatic tuning is available for both the FM and

AM bands.

■ Tapping the

•

and

•

buttons engages manual tuning. This

can be used for tuning to a speciﬁ c frequency. It is also

useful if you are trying to select a station that is too weak

for the auto search mode.

Regardless of the mode used to tune your AVR100, when it is

accurately tuned to a station ‘

•

TUNED

•

’ lights up in the display.

Storing a preset

To store a preset, tune to the radio station you wish to store.

Press the STORE button: this causes ‘MEMORY’ to ﬂ ash in the

display. Now select the preset number you wish to assign to

the station using the

•

and

•

buttons on the front panel (or

P– or P+ on the remote control handset). Press the STORE

button again.

Once the preset is stored, the display reverts to show the

station name (if RDS information is transmitted) or its frequency.

To quit the memory function without storing a preset, leave the

tuner controls untouched for ten seconds. It is also possible to

overwrite a stored station by saving another in its place. There

are thirty presets available for FM use and ten for AM use.

Your presets are retained for several weeks (but not indeﬁ nitely),

when the AVR100 is disconnected from the mains supply.

Deleting an unused preset

Press the STORE button, then select the preset number you

want to delete using the

•

and

•

buttons (or P– or P+ on

the remote control handset), followed by the FM MUTE/MONO

button.

The display brieﬂ y shows ‘DELETED’ and ‘– –’ is shown in

place of the preset number. You can reactivate a deleted preset

number by storing a station in the normal way.

The AVR100’s radio tuner can be controlled from the upper row

of front panel buttons (see diagram, below) or from the remote

control handset (see ‘Using the remote control’).

Using the tuner

after 3 seconds

DOLBY PRO LOGIC SPEAKERS

VIDEO 1

CH dB

DOLBY PRO LOGIC SPEAKERS

VIDEO 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA AVR100 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info