Bedienungsanleitung Arcam DiVA T61 (Seite 7 von 12) (Englisch)

578786

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

T61

Storing a preset

To store a preset, tune to the radio station you wish to store.

Press the

STORE button: this causes ‘PRESET STORE’ to ﬂ ash

in the display. Now select the preset number you wish to assign

to the station using the preset memory buttons or the

and

buttons on the front panel. Press the STORE button again.

Once the preset is stored, the display reverts to show

the station name (if RDS information is transmitted) or its

frequency.

To quit the memory function without storing a preset, leave the

tuner controls untouched for ten seconds. It is also possible

to overwrite a stored station by saving another in its place.

There are thirty presets available for FM use and sixteen for

AM use.

Your presets are retained when the T61 is disconnected from

the mains supply.

Deleting an unused preset

Press the RDS and STORE buttons on the front panel, wait

about three seconds, then select the preset number you want

to delete using the

and

buttons, followed by the RDS

button.

The display brieﬂ y shows ‘DELETED’ and ‘– –’ is shown in

place of the preset number. You can reactivate a deleted preset

number by storing a station in the normal way.

RDS: Radio Data System

The Arcam T61 supports RDS Programme Service and RDS

Radio Text on FM broadcasts.

When a station carrying RDS information is selected ‘RDS’ lights

up in the display and shortly afterwards the station’s RDS name

(e.g. ‘BBC R3’) is shown.

Press the

RDS button to view any RDS text information (if a

station is not transmitting text information, the display brieﬂ y

indicates ‘NO TEXT’ and reverts to show the station name).

Press

RDS again to display the station’s frequency.

Pressing

RDS a third time returns you to a display of the station

name.

If the

RDS button is pressed while tuned to a non-RDS

station, the display shows ‘NO NAME’ for three seconds before

reverting to the default display.

Entering station names manually

Station names can be entered and saved for preset AM

stations, and for FM stations where RDS is not available.

Station names can be up to eight characters long.

First select the band and the preset station you wish to

name. Then press and hold the

RDS button for more than two

seconds. An ‘underscore’ line should appear blinking in the

ﬁ rst position of the frequency display area. Use the up and

down buttons beneath the display to scroll through the available

alphabet, numbers and special characters available until you

reach your wanted letter or character. Press the TUNING button

to conﬁ rm that character. The ‘underscore’ line will then move

to the next position. Repeat this process to enter the required

name. If you want to edit a character later, use the TUNING

button to step along and select it, then use the up down keys

as before to change it. When complete, press STORE to enter

the name into the preset memory.

T61 issue2.id 05/30/02, 7:43 PM7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA T61 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info