Bedienungsanleitung Arcam DiVA T61 (Seite 6 von 12) (Englisch)

578786

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

T61

Using your tuner

POWER

T61 AM/FM TUNER

STOREMONORDSBAND TUNING

43286blbm179bk5

103.50

PRESET

MHz

FM MUTE

STEREO

TUNED

SIGNAL

Front panel Controls

Preset Memory buttons

Directly select up to 32 preset stations (16 AM, 16 FM). Press

brieﬂ y for stations 1–8, press and hold for more than one

second for stations 9–16.

BAND

Selects FM or AM frequency band. The appropriate letters

appear on the display.

RDS

Switches between RDS modes on FM if RDS is available. See

the section ‘RDS: Radio Data System’.

MONO

Selects mono or stereo output. Stereo is only available on

FM radio stations. If a weak station is received in stereo

the background hiss can be reduced (and in most cases

eliminated) by selecting ‘MONO’.

In mono mode, FM muting is suppressed when tuning between

stations and the ‘FM MUTE’ indicator is switched off.

STORE

The STORE button allows you to assign radio stations to preset

numbers. See the instruction ‘Storing a preset’

Preset indicator

Indicates the number of the preset currently selected.

Signal strength

A seven step indicator showing the strength of a tuned station.

In FM generally 5 or more bars are required for good reception

and to lock onto RDS data.

Tuning

Switches between Tune and Preset mode for the down/up

buttons. Preset mode is indicated by PRESET on the display.

Tune down/up

Used to either scroll through presets, or to tune up and down

the broadcast band, depending on the current mode. See

Tuning to a station for more details.

Frequency/ RDS display

Indicates the frequency of the selected station in MHz (FM) or

kHz (AM). Also displays RDS information when present.

POWER

Switches the mains power to the unit on or off.

Power indicator

This glows green to show that the unit is ready for use.

The indicator glows red in standby mode when the tuner is

switched off via the remote control, or conﬁ gured in a custom

installation.

Operation

The T61 radio tuner can be controlled from the front panel

buttons or from the remote control handset (see ‘Using the

remote control’).

Tuning to a station

Pressing the TUNING button toggles between the two tuning

modes of the unit – ‘Preset’ or ‘Tune’. The selected mode is

brieﬂ y shown in the display.

Preset mode

In Preset mode, press the

and

buttons on the front

panel (or < or

on the remote control handset) to cycle up and

down the preset stations.

See ‘Storing a preset’ and ‘Deleting unused presets’, below.

Tune mode

Automatic tuning:

Press the

and

buttons on the front panel (or < or >

on the remote control handset) for longer than one second

to engage automatic tuning. The tuner searches for a radio

station signal of sufﬁ cient strength and stops. To skip to the

next station, press one of the buttons again. Automatic tuning is

available for both the FM and AM bands.

Manual tuning:

Tap the

and

buttons for manual tuning. This can be

used for tuning to a speciﬁ c frequency. It is also useful if you

are trying to select a station that is too weak for the auto

search mode.

Regardless of the mode used to tune your T61, when it is

accurately tuned to a station ‘TUNED’ lights up in the display.

T61 issue2.id 05/30/02, 7:43 PM6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA T61 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info