138744
8
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
DV139
E-8





 




  
  













CR100 Universal remote control
The CR100 remote control is a multi-function unit that controls the
DV139 and up to seven other devices. The instructions on this page
only refer to the control of the Arcam DV139.
For information on using the remote control for other devices, and
a full list of features, see the instruction booklet supplied with the
CR100.
Device selection
IMPORTANT: Press the ‘DVD’ button rst to
operate the DV139.
On/Stand-by
This allows the DV139 to be put into and taken out
of stand-by remotely.
Navigation buttons
Arrow buttons allow navigation around the Basic
and Advanced Set-up menus on the DV139.
Conrm a selection by pressing OK.
SHIFT
B
to Power on
SHIFT
C
to Power off
Numeric keys
Gives direct access to individual tracks on audio
CDs.
VOLUME +/–
Adjusts the sound output.
MODE
This button brings up a menu similar to the ‘Audio’
page of the Set-up menu and allows the Dolby
Pro Logic II settings to be changed while a disc
is being played. Cycles through available audio
surround modes.
SHIFT + MODE cycles through HDMI settings.
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, off).
0
/
Press and release to skip backwards to the
previous track(
0
) or forwards to the next track
(
/
).
RPT
Cycles through repeat play options (chapter, title,
disc, etc.).
Press SHIFT + RPT to repeat a specic section of a
DVD or VCD (an ‘A-B repeat’).
MENU
Activates the DVD menu if available.
RND
Toggles random (‘shufe’) play of chapters/tracks
on and off.
Source selection and handset conguration
DVD
DVD input/DVD controls
SAT
Satellite decoder input/SAT controls
AV
Television (sound) input/AV controls
TUN
Radio tuner input/TUN controls
AMP
Arcam amplier
AUx
Auxillary (line) input/AUX controls
VCR
Video Cassette Recorder input/VCR
controls
CD
CD player input/CD controls
Press the relevant button once to select input and
recongure the handset.
Press and hold the button until the power LED
blinks once if you wish to recongure the handset
without changing the input.
Advanced controls
These buttons are described on the next page.
MUTE
Press once to mute an Arcam amplier. Press
again (or use +/– volume) to un-mute.
If the remote control receiver
(located on the right of the front-
panel window) is not ‘visible’ to the
remote control hand-set, then the
remote control will not work! Either
locate the unit differently, or take
advantage of the remote control
input on the rear of the player
(consult your dealer for further
information on this option).
Remember to install
the four AAA batteries
supplied before trying to
use your remote control.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam dv 139 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info