Bedienungsanleitung Arcam dv 139 (Seite 10 von 26) (Englisch)

138744

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

DV139

E-10



   

 





  













  

  

  











CR-515 remote control

DISP (display)

Press to cycle through the front panel display’s

brightness options (dim to bright, off).

CLEAR

Use CLEAR to clear a numeric eld.

Numeric keys

Gives direct access to individual tracks on audio

CDs. For tracks greater than 9, enter the digits in

sequence. For example, to play track 15, press 1,

then 5, then OK.

HDMI

Selects the picture resolution for HDMI output.

MUTE

Press once to mute an Arcam amplier. Press

again (or use +/– volume) to un-mute.

Volume +/–

Adjusts the volume on Arcam remote-controllable

ampliers.

Note that the volume (+/–) controls and MUTE

button have no effect on the audio output level of

the DVD players.

OPEN

Opens and closes the disc tray

Page Up/Down (DVD-audio)/

Slow play (other discs)

DVD-audio: Some DVD-audio discs allow the user

to browse through images (photographs of the

artist, lyrics, etc.) while music is being played. Use

the

buttons to change to the previous/

next page. Note that this is not available on all

DVD-audio discs.

Other discs: Press

on the remote control

to play slow forward or backwards. Press the

button repeatedly to cycle through the different

speeds. To resume normal playback speed, press

PLAY.

Note that slow-play does not apply to audio CDs or

DVD-audio discs.

Navigation buttons

Arrow buttons allow navigation around the Basic

and Advanced Set-up menus on the DV139.

Conrm a selection by pressing OK.

Playback control

Pause (

;

), Play (

) and Stop (

Fast play and Skip chapter/tracks

Play fast (

) and Skip (

) chapters/tracks

in both directions.

Advanced controls

These buttons are described on the next page.

On/Standby

This allows the DV139 to be put into and taken out

of stand-by remotely.

Activates the DVD menu if available.

SETUP

Ensure no disc is playing and press SETUP to

access the ‘Setup’ menu.

Press SETUP a second time to exit the setup menu.

SRCH (search)

Displays Search menu with Time, Title and Track

options.

STATUS

Press STATUS to give play status information about

the current disc. Press STATUS again to close the

status display.

The status information displayed varies depending

on the type of disc – DVD, CD or VCD.

This button can be used to turn on backlighting

without affecting any action.

The CR-515 is a remote control designed for use

with Arcam DVD players. Some owners may wish to

use a dedicated remote in preference to a Universal

remote control.

If the remote control receiver

(located on the right of the front-

panel window) is not ‘visible’ to the

remote control hand-set, then the

remote control will not work! Either

locate the unit differently, or take

advantage of the remote control

input on the rear of the player

(consult your dealer for further

information on this option).

Remember to install

the four AAA batteries

supplied before trying to

use your remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam dv 139 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info