Bedienungsanleitung Arcam P777 (Seite 6 von 50) (Deutsch, Englisch, Holländisch, Französisch)

578808

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

E-6

speakers

Speaker placement

e P777 allows connection of up to seven

loudspeakers. All speakers, with the exception of the

subwoofer, should be arranged around your normal

viewing/listening position (see diagram). e subwoofer

can be placed almost anywhere and we recommend

experimenting with it in various positions to obtain the

best result.

e closer you place a speaker to intersecting room

surfaces (corners, wall and ceiling, wall and oor),

the stronger the bass output. is can help bass-shy

speakers, but it can also add too much bass. Again, just

moving a speaker a few inches can oen make a big

dierence in sound.

Position your front le (L) and right (R) speakers

to achieve a good stereo image for normal musical

reproduction. If they are placed too close together there

will be a lack of spaciousness. Alternatively if they are

placed too far apart the stereo image will appear to have

a hole in the middle and will be presented in two

halves.

e centre speaker (C) allows for a more

realistic reproduction of dialogue and

centre sounds as well as wider and

better imaging for stereo eects

and background sounds for

home cinema use. Do not

compromise on the quality

of your centre speaker as it

carries all the dialogue for a

home cinema system.

SBL SBR

SL SR

Notes on making speaker

connections

< Do not make any connections to any amplier

while it is switched on. We recommend that

your amplier is completely disconnected

from the mains supply before starting.

< Before switching your amplier on for the

rst time aer connecting to speakers, please

check all connections thoroughly. Ensure

that bare wires or cables are not touching

each other or the amplier’s chassis (which

could cause short circuits), and that you

have connected positive (+) to positive and

negative (–) to negative. Be sure to check the

wiring for both the amplier and the speaker.

< Aer making connections: switch the

amplier on, with the pre-amplier volume

set to a low setting. Select a source signal, then

gradually increase the volume to the required

listening level.

< If you are unsure as to how your system

should be connected, or need advice on

bi-wiring or bi-amping, please contact your

Arcam dealer who will be happy to help you.

Speaker wiring options

Single wiring

Single wiring is the conventional wiring method of

running a single cable per channel between the amplier

and the speaker; this is the easiest technique.

Bi-wiring

Bi-wiring is running two separate cables between the

amplier and each speaker, with one cable carrying

the low-frequency information, the other the higher-

frequency signals.

Bi-wiring can improve the sound of your system because

the separation of high- and low-frequency signal

currents into dierent speaker cables avoids distortions

caused by the dierent currents interacting with one-

another within a single cable, as occurs in single-wired

systems.

e P777 is designed to allow easy bi-wiring, but you

will need to connect to loudspeakers that provide

separate terminals for the two cables. Each speaker

must have two pairs of terminals; one pair labelled

or ‘High Frequency’, the other pair labelled LF or ‘Low

Frequency’.

Bi-amping

Bi-amping is the separation of the amplication of

low- and high-frequency signals over two ampliers.

Bi-amping requires the use of two ampliers per

channel.

e surround le (SL) and right (SR) speakers

reproduce the ambient sound and eects present in a

multichannel home cinema system.

e surround back le (SBL) and surround back right

(SBR) speakers are used to add extra depth, a more

spacious ambience and sound localisation.

A subwoofer (SW) will greatly improve the bass

performance from your system. is is useful for

reproducing special cinema eects, especially where

a dedicated LFE (Low-Frequency Eects) channel is

available, as with Dolby Digital or DTS Digital Surround

encoded discs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam P777 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info