Bedienungsanleitung Arcam solo movie 2 1 (Seite 13 von 30) (Englisch)

160350

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

E-13

movie 2.1

solo

English

remote control











 









  

  













































Inserting batteries into the

remote control

1. Open the battery compartment by pressing the

button on the back of the handset.

2. Insert four ‘AAA’ batteries into the battery

compartment – two facing the top of the unit, and two

facing the end, as in the diagram.

3. Lower the end cap onto the plastic locating plate in

the handset. This acts as a hinge, and you can now push

the end cap ﬁrmly into its locked position with a click.

Select the source key ﬁrst

Remember to select a source key before pressing

command buttons – commands vary depending on the

source selected!











 



DVD

DVD/CD

SAT

SAT – Satellite set-top box

AV sound input (use with TV)

TUN

DAB/FM/AM tuner

AMP

Controls the Ampliﬁer features of Solo

Movie 2.1

AUX

Auxillary input/iPod via rDock or rLead

VCR

Not used

TAPE

Selects Tape input on front panel

MCH

(Multi-channel) Not used on Solo Movie

2.1

The CR100 Universal remote

controller

The CR100 is a sophisticated ‘universal’ remote control

that can control up to eight devices. It’s pre-programmed

for use with the Solo Movie 2.1 and many other Arcam

products (ampliﬁer, multi-channel sound processor,

CD-player or DVD-player).

With its extensive built-in library of codes, it can also be

used with thousands of other audio-visual components –

TVs, satellite and set-top boxes, VCRs and third-party CD

players. See the CR100 Handbook for a list of these.

The CR100 is a ‘learning’ remote, so you can teach it

almost any function from an old single-device remote.

You can also program the CR100 to issue a sequence of

commands (‘macros’) from a single button press.

See the CR100 Handbook for details.

As the CR100 is a system remote controller, some of the

keys are not used with the Solo Movie 2.1. The unit does

not have VCR, CD or MCH (multi-channel) inputs, so these

keys do not change the source.

The

VCR and CD keys can still be programmed to control

products, so if you have a VCR connected directly to your

TV or SAT box, you can use the CR100 to control it as

part of your system.

To play CDs, the Solo Movie 2.1 should be thought of

as a DVD player, so you should use the

DVD button. It is

possible to duplicate the DVD functions on the CD key if

you want to use both keys to operate the DVD/CD part

of Solo Movie 2.1. See the CR100 handbook for details.

Source keys

As the CR100 can operate different features of the Solo

Movie 2.1 as well as a range of other equipment, many of

the buttons have more than one function depending on

the ‘device mode’ selected.

The device selection keys:

DVD, SAT, AV (TV), TUN, AMP

and AUX, select the source and conﬁgures the CR100 to

control the particular source.

In other words, the other buttons are often ‘context

sensitive’ so you’ll have to tell it what sort of device you

wish to control (press the

AV button for a video display,

for example) before you can control it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam solo movie 2 1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam solo movie 2 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info