Bedienungsanleitung Arcam solo movie 5 1 (Seite 5 von 30) (Englisch)

371605

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

movie 5.1

solo

front panel controls

Power

Note that the primary power-switch for Solo Movie

5.1 is on the rear of the unit. If the power light is not

illuminated at all, check that the unit is receiving mains

power and the rear power switch is ‘on’.

Press the POWER button to switch Solo Movie 5.1

between ‘on’ and ‘stand-by’.

When Solo Movie 5.1 is in stand-by, the light next

to the power button on the front-panel glows red,

and the front-panel display shows the current time.

Pressing POWER when the unit is in stand-by will

cause the unit to switch on and the power button

light turns blue.

You can also press and hold the POWER button to

put the unit into ‘hard stand-by’ – a very low-power

option that retains clock settings (see page 21).

MENU SOURCE INFO OK

POWER

VOLUME

TAPE

�

�

In power stand-by mode,

press the MENU button to

switch between the clock and

the alarm display.

In power-on mode, press

MENU to access the Ampliﬁer

menu. Press and hold MENU

to access the Advanced

Set-up (On-Screen Display)

menus.

Source –/+

Press the SOURCE+ or

SOURCE– button to cycle

through the available signal

sources. If the Ampliﬁer

menu is active, these buttons

navigate through the menu

items (see page 14).

Info

Press the INFO button to

cycle through the available

information screens on the

front panel display for the

current source.

Press the OK button to

conﬁrm a selection (a DVD

menu choice, for example).

(Stop/Eject)

Press the

button once to stop a

disc playing: this is a ‘resume stop’. Pressing

the button twice is a ‘complete stop’ (see

page 21).

Press and hold the button (for more than

one second) to open the disc tray.

Headphone output

This 3.5mm stereo jack

socket is for attaching a set

of headphones. Sound to

the speakers is muted when

headphones are used.

Tape input

This is a stereo analogue

input, suitable for audio

sources such as a portable

tape player, MP3 player or

games console.

Play/Pause

Press the

;

button to start

playing a disc, pause a playing

disc, or resume playing a

paused disc.

Skip back/forward

To skip ‘chapters’ on a DVD

(or ‘tracks’ on a CD), press

. The buttons are also

used to step through option

settings when the Ampliﬁer

menu is active (see page 14).

When skipping back, the ﬁrst

button press takes you to

the beginning of the current

chapter. Pressing the button

again takes you to the start of

the previous chapter.

Mute

Use this button to mute the

volume. If Solo Movie 5.1 is

muted, pressing the MUTE

button for a second time

or changing the volume will

unmute it.

Volume –/+

Use these buttons to

decrease (–) or increase (+)

the volume. If Solo Movie 5.1

is muted, changing the volume

will unmute it. The current

volume setting is shown on

the front panel display.

Front panel display

This is a vacuum ﬂuorescent

display with variable brightness.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam solo movie 5 1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam solo movie 5 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info