Bedienungsanleitung Arcam SoloSub (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

578740

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

E-5E-4

English

important safety

instructions

installation

1. Read these instructions

All the safety and operating instructions

should be read before this product is

operated.

2. Keep these instructions

e safety and operating instructions

should be retained for future reference.

3. Heed all warnings

All warnings on the appliance and in

the operating instructions should be

adhered to.

4. Follow all instructions

All operating and use instructions should

be followed.

5. Do not use this apparatus near water

e appliance should not be used near

water or moisture – for example, in a wet

basement or near a swimming pool.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. e wide blade or the

third prong are provided for your safety.

If the provided plug does not t into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories

specied by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-

over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Please keep the unit in a well-ventilated

environment.

Power

e Solo sub is supplied with a moulded

mains plug already tted to the lead. Check

that the plug supplied ts your supply. If

your mains supply voltage or mains plug is

dierent, please contact your Arcam dealer

immediately.

Solo sub is tted with a transformer

designed to accept nominal mains voltages

from 110-120V to 220-240V.

220-240V~

110-120V~

First of all, make sure the voltage switch is

set to the correct setting. Connect the mains

cable to the power socket on the back of the

Solo sub, making sure that it is pushed in

rmly. Now push the plug into your mains

socket and switch the socket on.

Note: If the unit is to be left unused for an

extended period, disconnect it from the

mains supply to save power.

Turn on from standby

e Solo sub is tted with a mains power

switch on the rear panel, beside the power

socket. Make sure it is switched on to use

the Solo sub.

e push-in STANDBY button provides two

settings: AUTO and MANUAL.

STANDBY

AUTO MANUAL

AUTO (button out) switches the Solo sub’s

amplier to standby aer a period of about

15minutes when no audio signal has been

received. When the unit is in standby the

PWR LED will glow red.

MANUAL (button pushed in) means that

the Solo sub’s amplier is on whenever the

unit is receiving mains power. e PWR

LED will glow green.

Note: If the INPUT selector is set to

WIRELESS, the WIRELESS LED will flash

blue intermittently whenever the unit is on

standby. It will glow a constant blue when

receiving an audio signal or mains power.

Care of your speaker

Running-in

In the same way as a new car requires a

‘running-in’ period, so do all loudspeakers.

Your Solo sub may sound good when you

rst connect it, but with time it will improve

dramatically. It takes about 50hours of use

before its full potential is realised.

Cleaning

To clean your speaker simply use a so,

slightly dampened cloth to wipe o any

dust or dirt. Do not use solvent-based or

chemical cleaning products as these may

damage the nish of the speaker cabinet.

Power handling

Arcam speakers are designed to reproduce

recorded music under normal domestic

conditions. We do not recommend nor

warrant them for commercial applications,

such as discothèques, public address, etc.

What’s in the box?

< Solo sub subwoofer

< Power cord

< User manual

< Registration card

Positioning the unit

Place the Solo sub speaker unit on a level,

rm surface, avoiding direct sunlight and

sources of heat or damp.

Do not place the Solo sub in an enclosed

space such as a bookcase or closed

cabinet unless there is good provision for

ventilation. e unit is designed to run

warm during normal operation.

WARNING: To reduce the risk of fire or electric shock,

do not expose this apparatus to rain, moisture,

dripping or splashing. Objects filled with liquids,

such as vases should not be placed on the apparatus.

WARNING: The mains plug or appliance coupler is

used as a disconnect device, the disconnect device

shall remain readily operable.

This lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the

user to the presence of non-insulated ‘dangerous

voltage’ within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock.

Warning: To reduce the risk of electric shock,

do not remove cover (or back) as there are no

user-serviceable parts inside. Refer servicing to

qualified personnel.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance instructions

in the literature accompanying the appliance.

This equipment is a Class II or double

insulated electrical appliance. It has been

designed in such a way that it does not

require a safety connection to electrical earth.

Correct disposal of

this product

This product contains electrical

or electronic materials. The

presence of these materials may,

if not disposed of properly, have

potential adverse effects on the

environment and human health.

Presence of this label on the product means it

should not be disposed of as unsorted waste and

must be collected separately. As a consumer, you

are responsible for ensuring that this product is

disposed of properly.

15. Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture, does not operate normally,

or has been dropped.

16. Caution regarding installation: For

heat dispersal, do not install this unit

in a coned space such as a bookcase or

similar enclosure.

Arcam SoloSub Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info