Bedienungsanleitung Arcam UDP411 (Seite 5 von 107) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

578728

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

E-5E-4

English

Coaxial digital output

Use this socket if you are using an AV receiver

with a coaxial digital input. Connect to the digital

input using a suitable 75Ω screened cable.

CAUTION: Never connect the digital output

socket to a conventional audio input.

USB connection

Insert USB ash memory devices here. USB

memory can be used to save downloaded

content. e UDP411 can also play certain

digital les stored on USB memory drives

(see ‘disc & le formats’ on page E-8).

HDMI digital video output

Connect this output to your display

or AV receiver if available for the best

digital video and audio connection: see

page E-7.

Network connection

Connect this socket to a port on your

network router using an Ethernet patch

cable (see page E-9). An internet

connection enables interactive content

for BD-Live discs (for setup details see

‘Network’ on page E-17).

Phono audio output

Connect these to your amplier’s CD (or other line-

level) input using suitable high quality interconnect

cables. Ensure that the le and right audio outputs

from the BD player are connected to the same le and

right inputs on your amplier.

Power inlet

Connect the correct

mains cable here.

Optical digital output

Use this socket if you are using an AV receiver

with an optical digital audio input.

Remote in

is allows remote-control signals to be received

by the UDP411 if the remote sensor is covered (or

otherwise not ‘visible’ to the remote-control).

See page E-4 for more information.

RS232

is connection allows for remote control

from a third-party home automation

system or computer.

See page E-4 for more information.

12V trigger input

is socket allows the UDP411 to be switched in and

out of standby mode by an amplier (or another item

of AV equipment) with a 12V TRIG OUT function. See

page E-4.

installation

Arcam’s UDP411 provides class-leading sound quality from Blu-ray

Discs, DVD-Video discs and compact discs.

e UDP411 has a state-of-the-art Delta-Sigma DAC (Digital-to-

Analogue Converter) which provides audiophile sound quality for video

and audio discs.

e high performance UDP411 Blu-ray Disc player is designed to truly

bring your movies and music to life.

Placing the unit

< Place the BD player on a level, rm surface,

avoiding direct sunlight and sources of heat or

damp.

< Do not place the BD player on top of an amplier

or other source of heat.

< Do not place the BD player in an enclosed space

such as a bookcase or closed cabinet unless there

is good provision for ventilation. e BD player is

designed to run warm during normal operation.

< Do not place any other component or item on

top of the BD player as this may obstruct airow

around the unit, causing the BD player to run hot.

< Make sure the remote-control receiver (next to

the display on the front panel) is unobstructed, or

remote control will be impaired.

< Do not place your record deck on top of this

unit. Record decks are very sensitive to the noise

generated by mains power supplies which will be

heard as a background ‘hum’ if the record deck is

too close.

Power

e BD player is supplied with a moulded mains plug

already tted to the lead. Check that the plug supplied

ts your supply – should you require a new mains lead,

please contact your Arcam dealer.

If your mains supply voltage or mains plug is dierent,

please contact your Arcam dealer immediately

Push the IEC plug end of the power cable into the

socket on the back of the BD player, making sure that it

is pushed in rmly. Plug the other end of the cable into

your mains socket and, if necessary, switch the socket

on.

The remote control and trigger

inputs

e REMOTE IN input can be used to pass RC5 codes to

the UDP411 if it is installed in a position, or a system,

where infrared cannot be used. If this is required, please

contact your dealer for further information.

e TRIGGER IN input can be used to switch the UDP411

in and out of standby. Connecting the trigger output of

your Arcam amplier (or other compatible device), will

cause the UDP411 to come out of standby automatically

when the amplier is switched on, returning to standby

when the amplier is switched o. Please see your

amplier handbook for further information.

In normal use there is no need to make any connections

to these inputs.

NOTE

< e remote control input requires a mono

3.5mm jack, with the tip active and the sleeve

grounded.

< e remote control signals must be in

modulated RC5 format (at 36kHz), with a

voltage level of between 5V and 12V.

e RS232 input is for optional connection to a home

automation system or a computer. Various third-party

sytems are available providing sophisticated control

over all your entertainment devices using touch screens

etc. Contact your dealer or installer for further details.

e technical details of the remote control protocol are

available from Arcam on request

(email support@arcam.co.uk).

Interconnect cables

We recommend the use of high-quality screened cables

that are designed for the particular application. Other

cables will have dierent impedance characteristics

that will degrade the performance of your system (for

example, do not use cabling intended for video use to

carry audio signals). All cables should be kept as short as

is practically possible.

It is good practice when connecting your equipment to

make sure that the mains power-supply cabling is kept

as far away as possible from your audio cables. Failure to

do so may result in unwanted noise in the audio signals.

Balanced audio output

Connect these to your amplier’s CD (or other balanced) input

using suitable high quality interconnect cables. Ensure that the

le and right audio outputs from the BD player are connected

to the same le and right inputs on your amplier.

Wireless network connection

Connect the supplied Wi-Fi antenna if a

wirelss network connection is required.

An internet connection enables interactive

content for BD-Live discs (for setup details

see ‘Network’ on page E-17).

Arcam UDP411 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info