Bedienungsanleitung Argo ECOLIGHT SINGLE SPLIT (Seite 11 von 41) (Englisch)

724568

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

V 09/19

11. Wi-Fi button

Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon

will appear on the remote control display. When the remote control is off, press and hold the

"Mode" button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.

12. LIGHT button

Press this button to turn off the indoor unit's display light. The icon will disappear from the

remote control display.

Press this button again to turn on the display light. The icon will appear on the display.

Getting to know the button combination functions

Energy saving function

In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy

saving function. When you start the energy saving function, "SE" will appear on the remote

control display and the air conditioner will automatically adjust the set temperature according to

the factory settings to achieve the best energy-saving effect. Press TEMP and CLOCK again

simultaneously to exit the energy saving function.

N.B.:

• When the energy saving function is enabled, the fan will operate at the default automatic speed

and cannot be adjusted.

• When the energy saving function is enabled, the set temperature cannot be adjusted. The

remote control will not send a signal to the unit when the TURBO button is pressed.

 The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving

function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was

set in cool mode, start the energy saving function to cancel it.

8°C heating function

In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C

heating function. When this function is enabled, and 8°C will appear on the remote control

display and the air conditioner will continue to operate at 8°C. Press TEMP and CLOCK again

simultaneously to exit the 8°C heating function.

N.B.:

• When the 8°C heating function is enabled, the fan will operate at the default automatic speed

and cannot be adjusted. The remote control will not send a signal to the unit when the TURBO

button is pressed.

The SLEEP and 8°C heating functions cannot operate simultaneously. If the 8°C heating function

was set in cool mode, pressing the SLEEP button will cancel it. If the SLEEP function was set

in cool mode, starting the 8°C heating function will cancel it.

• When the temperature display is in °F, the remote control will show that the unit is operating at

46°F.

Remote control button lock function

Press "▲" and "▼" simultaneously to enable or disable the remote control button lock function.

When this function is enabled, will appear on the remote control display. If you attempt to

operate the remote control, the icon will flash three times and no signal will be sent to the

unit.

Switching temperature display

In OFF mode, press the "▼" and "MODE" buttons simultaneously to switch from a temperature

display in °C to °F.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo ECOLIGHT SINGLE SPLIT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo ECOLIGHT SINGLE SPLIT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info