Bedienungsanleitung Argo Wall Dual 18000 (Seite 11 von 30) (Englisch)

665465

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

V 11/15

• If no adjustment is made for 5 seconds the remote control will exit the setting mode. This also

applies to the TIMER ON/OFF function.

12. TIMER ON / TIMER OFF button

SETTING TIMER ON

This function allows you to program the air conditioner to turn on. When you press this button, the

icon will disappear from the display and the word "ON" will flash on the remote control display.

Press "▲" or "▼" to adjust the TIMER ON setting.

Press and hold "▲" or "▼" for 2 seconds to rapidly change the time until you reach the desired

value. Press TIMER ON to confirm. The word "ON" will stop flashing. The

icon will re-appear

on the display.

CANCELLING TIMER ON

If the TIMER ON function is enabled, press the TIMER ON button to cancel the setting.

SETTING TIMER OFF

This function allows you to program the air conditioner to turn off. When you press this button, the

icon will disappear from the display and the word "OFF" will flash on the remote control

display. Press "▲" or "▼" to adjust the TIMER OFF setting. Press and hold "▲" or "▼" for 2

seconds to rapidly change the time until you reach the desired value. Press "TIMER OFF". The

word "OFF" will stop flashing. The

icon will re-appear on the display.

CANCELLING TIMER OFF

If the TIMER OFF function is enabled, press the TIMER OFF button to cancel the setting.

N.B.:

• You can set the TIMER ON and TIMER OFF function in ON and OFF mode.

• Before you set the TIMER ON or TIMER OFF function, set the clock.

• When the TIMER ON or TIMER OFF function is enabled, the air conditioner will turn on or off

according to the set time. Turning the air conditioner ON/OFF will not affect the setting.

Getting to know the button combination functions

Energy saving function

In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy

saving function. When you start the energy saving function, "SE" will appear on the remote

control display and the air conditioner will automatically adjust the set temperature according to

the factory settings to achieve the best energy-saving effect. Press TEMP and CLOCK again

simultaneously to exit the energy saving function.

N.B.:

• When the energy saving function is enabled, the fan will operate at the default automatic speed

and cannot be adjusted.

• When the energy saving function is enabled, the set temperature cannot be adjusted. The

remote control will not send a signal to the unit when the TURBO button is pressed.

• The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving

function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was

set in cool mode, start the energy saving function to cancel it.

8°C heating function

In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C

heating function. When this function is enabled,

and 8°C will appear on the remote control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Wall Dual 18000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Wall Dual 18000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info