Bedienungsanleitung Ariete 6233 Eco Power (Seite 12 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

645844

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite



When the iron reaches the selected temperature, the lamp (E) turns off (the temperature lamp turns off and on while ironing,

indicating that the iron is maintaining the right temperature).

Follow the instructions on the care label of the garment to be ironed so that the dots

shown on the iron correspond to those shown on the label.



Divide the articles to be ironed according to the types of material: wool with wool, cotton with cotton, etc…

Because the iron heats up much more quickly than it cools down, it is advisable to start with those fabrics which require

lower temperatures and move on to those which require progressively higher temperatures.

If the material is made up of more than one type of bre, always set the temperature to the bre which requires less heat.

For example, if the material is made up of 70% synthetics and 30% cotton, set the temperature control to position (

•

) (see

table) without steam, that is, the temperature for synthetic fabrics.

If you do not know the composition of the article to be ironed, choose a part of the article which will not be seen. Do a test

ironing on this part to establish the appropriate temperature (always start with a relatively low temperature and work up until

the ideal temperature is reached).

Pure (100%) wool articles can be ironed with the iron set to one of the steam positions. To avoid pure wool, silk and synthetic

materials becoming shiny, it makes good sense to iron them on the reverse side. For other materials, especially velvet,

which can become shiny very easily, cover them with a cloth and iron in one direction only, using light pressure. The iron

must be kept constantly moving over the fabric.

Label Ironing

instructions

Kind of fabric Thermostat

Synthetic fabrics

Acetate

Acrylic

Viscose

Poliammide (Nylon)

Viscose (Rayon)

Silk

•

Wool

••

Cotton

Linen

•••

The mark on the label means do not iron



Steam ironing is only possible at high temperature.

Ensure that there is enough water in the water tank.

Rest the iron upright on the iron stand (H).

Insert the plug into the wall socket.

Position the temperature adjustment knob (F) on position (

•••

) or higher.

When the temperature control lamp (E) turns off, move the steam adjustment selector (B) to the desired position. You get

maximum steam dispensing by moving the selector to the “MAX” position.

Steam is not dispensed when it is moved to “ ” (Fig. 2).



If there is water in the tank and the temperature is set on (

•••

) or on a higher level, all you have to do is press the steam

button (C).



Make sure the steam adjustment selector is set on “0” and that there is water in the tank. Press the spray button (D).

It may be necessary to press the spray button repeatedly to activate this function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariete 6233 Eco Power Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info