Bedienungsanleitung Ariete 6233 Eco Power (Seite 13 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

645844

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite





Insert the plug into the wall socket. Move the steam adjusting knob (B) onto “0”.

Set the temperature control knob (F) according to the type of fabric to be ironed.

Wait a few minutes for the soleplate to reach the set temperature.



This special ironing procedure serves to remove creases from curtains, fabrics, etc. Set the ironing temperature by turning

the adjustment knob (F) past the symbol (

•••

). Put the curtain or fabric in the position you want to iron it vertically and

press the steam button.

If the temperature lamp is on, do not press the steam button more than three times in a row.



Do not iron fabrics held by other people.



Turn the temperature control knob (F) to “MIN”.

Disconnect the plug from the wall socket.

Put the iron in a vertical position and let it cool down.

Empty the tank: open the water lling cover (A), turn the iron upside-down and let the water pour out (Fig. 8).



Let the iron cool down before emptying the tank: danger of burns.

Wrap the power cord around the iron without pulling it too tight (Fig. 6). Store the iron in a vertical position (Fig. 7).





Before cleaning, always disconnect the plug from the power point and allow the iron to cool down.



Never immerse the appliance in water or other liquids.



Check the state of the power cable of your iron on a regular basis before using it, and if it is damaged, take it to the

service centre closest to you to have it replaced only by specialised personnel.







Fill the tank one-fourth full with water using

the measuring cup (P) provided

(Fig. 5)

Fill the tank up to the level marked MAX.

Set the iron on a stable surface in a vertical position on the iron stand (H). Plug it into the socket. Make sure the steam

adjustment selector is set on “0”.

Position the temperature adjustment knob on “MAX”.

Heat the iron until the lamp (E) turns off a second time.

Position the temperature adjustment knob on “MIN”.

Unplug the iron and keep the iron in a horizontal position on a sink.

Press the SELF CLEAN button (M) and keep the iron in a horizontal position. Steam and boiling water will come out of the

holes of the soleplate. They will remove the lime deposits and impurities that have accumulated inside the soleplate.

Gently move the iron back and forth until the tank is completely emptied.

Put the steam adjustment selector back on minimum “0” at the end of the self-cleaning procedure.

Put the iron in a vertical position on its stand and wait for the soleplate to cool down completely.

Make sure that the soleplate is completely dry before storing the iron.







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariete 6233 Eco Power Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info