Bedienungsanleitung Ariston FB 86 P (Seite 7 von 14) (Englisch)

47959

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Fast clean

How to set the cleaning process in motion

– Take all the accessories out of the oven. Remove the

toughest grease and food spots and especially all

substantial overflows in order to avoid the creation of

flames or smoke.

– Shut the oven door.

– Set the mode selector to

– Programme it. You can choose between

· an immediate start: same procedure as for cooking,

· a delayed start: same procedure as for cooking,

– The pyrolytic self-cleaning process takes approximately

90 minutes.

What happens during the fast clean process?

When the temperature reaches 325°C, the oven door is

automatically locked: the letter "P" comes up on the display,

along with the remaining process time, as it decreases.

The oven door stays locked for as long as the temperature

inside the oven remains high.

What happens at the end of the fast clean

process?

When the process is over,

"P. 0.00""P. 0.00"

"P. 0.00"comes up on the display.

To be able to open the oven door, you will have to:

• wait for the temperature inside it to have dropped

back to an acceptable level,

• have set the mode selector knob back to 0.

You will notice some white dust deposits on the bottom and

sides of the oven, remove them with a damp sponge when

the oven has cooled down completely.

If on the other hand you want to take advantage of the heat

accumulated during the process to start cooking, the dust

can stay where it is: it does not form a source of danger to

your food.

Safety devices

In fast clean mode, the temperature inside the oven reaches

500°, which is necessary for the destruction of food and fat

residue, as illustrated below.

Given this high temperature, your oven is fitted with some

safety devices:

• the oven door is locked automatically as soon as

the temperature is high in order to avoid all risks of

burns.

• the heating elements are no longer powered if an

anomaly occurs.

Notes:

1- Despite the high temperature inside the oven during the

pyrolytic self-cleaning process, the external surfaces of the

appliance remain lukewarm, thanks to:

• a reinforced insulation of the oven compartment

• a fan that ensures the circulation of air to cool down

the oven wall panels.

2- When looking through the oven door, you may notice some

particles that light up when they are destroyed by pyrolysis

upon contact with the heating elements: this is simply

spontaneous combustion, it is extremely normal and

without danger.

Precautions to be taken before performing the

fast clean process

1- Try to remove the larger food residue from inside the

oven using a wet sponge. We highly advise against the use

of detergents or all other products recommended for cleaning

ovens.

2- Remove all the accessories from the oven: they are

not designed to withstand such high temperatures. What's

more, some of these accessories would alter the result of

the pyrolytic self-cleaning process and obstruct the circulation

of heat inside the oven. The accessories can easily be

cleaned like everyday crockery and are dishwasher-proof.

3- Don't leave any tea towels on the oven door handle.

Warning: the oven surfaces may get hot during the fast

clean process: keep children well away.

Troubleshooting

DO NOT WORRY IF…

Some operating anomalies may arise. These are generally due to incorrect handling or to the erroneous valuation of a

phenomenon.

If your oven releases a lot of smoke during cooking:

• Make sure you have selected the correct cooking mode for the type of dish you want to prepare and that you have

selected the right accessories and put the dish in the oven at the recommended rack height.

• Check the temperature selected: it is no doubt too high for the type of cooking required.

• Check the degree of soil of the oven, and whether the latter needs to be cleaned. Food residue encrusted onto the

enamel coating inside the oven becomes charred and creates both smoke and pungent smells.

• Splashes of grease or overflows onto very hot surfaces could crate smoke.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston FB 86 P Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ariston FB 86 P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info