Bedienungsanleitung Ariston LSE 830 ST (Seite 29 von 68) (Englisch, Holländisch, Portugiesisch, Türkisch)

454498

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

Detergent and rinse aid

Only use specific dishwasher detergents. Pour the detergent into the

dispenser on the inside of the door. Before the wash cycle starts!

Useful tips

Proper dosage of

the rinse aid

improves drying.

If drops of water

remain on the

dishes or spotting

occurs, turn the

dosage adjuster to

a higher setting.

If, on the other

hand, the dishes

have white

streaks, then turn

the dosage

adjuster down to

a lower setting.

 Use the right

amount of

detergent: if you

use too much,

you will not get

cleaner dishes,

but just more

environmental

pollution.

 Keep your

dishwasher

detergent and

rinse aid in a

cool, dry place

and away from

children.

gr.

The detergent

Loading the detergent

To open lid A, press button B. The

detergent should be poured into the

two containers up to the rim.

Now you can close the lid: press it

down until you hear it click.

If you prefer to use the detergent

in tablet form, then place one inside

the container "D" and close the lid.

It won't close!

Check whether there is any

detergent residue on the edges of

the dispenser. It is due to this resi-

due that the lid won't close. Get rid

of it and you'll see that it closes.

The rinse aid.

This product makes dishes sparkle

more as it improves their drying.

The rinse aid container is situated

on the inside of the door. You should

fill it up when the words "add rinse

aid" scroll along the display screen.

If you pour too much rinse aid into

container and it overflows, clean

off all excess using a sponge.

Loading the rinse aid.

To open the dispenser, turn cap C

anticlockwise. Take care when you

pour in the rinse aid to avoid it

overflowing. You can adapt the

amount of rinse aid used by the

dishwasher: use a screwdriver or a

coin to adjust the dosage adjuster

F situated underneath the lid C.

You can choose from six different

positions. It is normally set to 4.

Never without salt

Loading the salt.

Always use salt which is intended

for dishwasher use.

The salt container is situated

underneath the lower rack, fill it

up as follows:

1.Pull out the lower rack

completely, unscrew and

remove the container cap

2. Is it the first time you load the

salt? First fill the container up

with water (you won't have to

do this again next time)

3. Put the dishwasher funnel on the

hole and pour in approximately

two kilos of salt. It is normal

that some water comes out of

the container.

4. Screw the cap back in place

carefully.

Water in your home

When should I load the salt?

The salt container should be filled

up when the

the words "add salt"

scroll along the display screen.

Intelligent salt.

Your dishwasher can adjust its salt

consumption according to the

hardness of the water in your home.

This way, you can optimise and

customise your dishwasher's salt

consumption (not too much, nor too

little).

To adjust salt consumption, do as

follows:

1. Unscrew the salt container cap

2. There is an arrow on the neck of

the container (see figure): if

necessary, turn the arrow anti-

clockwise from the "-" setting

to the "+" setting.

Select the arrow position

depending on the water hardness,

referring to the table provided.

You don't know

how hard the

water in your

home is? Ask the

company that

supplies water in

your area.

Water hardness varies according to where you live. If the water in your home is

hard, without water softening, incrustations would form on your dishes. Your

dishwasher is fitted with a water softener which uses special salt to get rid of

limescale in the water.

Water Hardness

Clarke

degrees

°fH mmol/l

Selector

position

Salt

consu-

mption

(grams/-

cycle)

Autono-

(cycles\2-

kg)

0 - 14 0 - 17 0 -1,7 / 0 /

14 - 36 18 - 44 1,8 - 4,4 "-" 20 60

36 - 71 45 - 89 4,5 - 8,9 MED 40 40

>71 > 89 > 8,9 "+" 60 25

To prevent rust

from forming, load

the salt just before

beginning a wash

cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston LSE 830 ST Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info