Bedienungsanleitung Ariston OKUP 140 (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

454643

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

GBGB

ATTENTION

Read your handbook carefully since it contains instructions

which will ensure safe installation, use and maintenance of

your appliance.

Your freezer is built to International standards (EN60) and

has been awarded the European approval mark (IMQ) for

compliance to UK electrical safety requirements. It also meets

the EC standards on the prevention and elimination of radio

interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under

no circumstances should it be installed outside.

2. The appliance should be used only by adults exclusively

for storing foodstuffs in compliance with the instructions

provided in the handbook. Under no circumstances should

children be allowed to operate, or tamper with, this prod-

uct.

3. For electrical safety, do not attempt to operate this appli-

ance with wet hands or feet.

4. Do not operate this appliance connected to an extension

lead. If a longer supply cable is required, this must be re-

placed with one of the same specifications in compliance

with the current electrical regulations. This operation should

Safety a good habit to get into

be carried out by a qualified person. Ensure that the cable is

not trapped or damaged during the installation.

5. Never pull the cable or the appliance to remove the plug

from the socket.

6. Do not touch the internal cooling elements, especially if

your hands are wet, since you could burn or hurt yourself.

Do not eat ice cubes straight out of the freezer.

7. Before doing any cleaning, disconnect the appliance from

the electricity (by pulling out the plug orturning off the gen-

eral switch in your home).

8. Before disposing of your old appliance, remember to break

or remove the lock as a safety measure to protect children who

might lock themselves inside the appliance when playing.

9. If your appliance is not operating properly, before calling

your after-sales service read the chapter on “Trouble Shoot-

ing” which might help you resolve the problem. Do not at-

tempt to repair the fault by intervening on the internal com-

ponents.

10. If the power supply cord must be replaced, please con-

tact one of our Customer Service Centers. In some cases,

the connections are made using special terminals and in oth-

ers a special tool must be used to access the connections.

Installation

To ensure that the appliance operates properly and to

reduce energy consumption, it is important that the

appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provide the

appropriate amount of air re-circulation. It is also important

that the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly

exposed to sunlight or near an oven, cook top or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure

that the voltage indicated on the rating plate, located within

the freezer, corresponds to the mains voltage in your home

and that the socket is fitted with a standard earthing wire in

accordance with safety standards for 46/90 systems. If the

socket is not fitted with an earthing wire, the manufacturer

will not be held liability for any damages and or injuries aris-

ing out of the use of the appliance. Do not use multiple

sockets or adapters.

Insufficient power?

The electrical socket must be able to handle the maximum

power load of the appliance, which is indicated on the rat-

ing plate located at the bottom left next to the vegetable

crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti-

cal upright position and wait at least 3 hours before insert-

ing the plug into the socket in order to ensure that it func-

tions properly.

For English Market only

The appliance is fitted with a continental 2-èin plug for fac-

tory testing. Before installation the plug should be cut off.

The appliance is designed to be installed in a switched spur

outlet fused at 13 Ampere. If the installation requires a 13

Ampere plug type to be fitted it should be conform to BSI

1363.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston OKUP 140 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info