Bedienungsanleitung Ariston Piccolo (Seite 27 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

719969

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

DESCRIPTION OF THE WATER HEATER (see fig. 4)

A. Pilot lamp B. Control knob C. Front cover

TECHNICAL CHARACTERISTICS

For the technical specifications, refer to the nameplate (the nameplate is located next to the water intake/outlet pipes).

The power consumption data in the table and the other information given in the Product Data Sheet (Enclosure A to

this manual) are defined in relation to EU Directives 812/2013 and 814/2013.

The products without the label and the data sheet for water heaters and solar devices, stipulated in regulation 812/2013,

are not intended to be used in such assemblies.

Products equipped with a regulator knob have the thermostat positioned in the <ready to use> setting indicated in

the Data Sheet (Enclosure A), according to which the relevant energy class has been declared by the manufacturer.

This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC 60335-2-

21. The CE marking of the appliances attests its conformity to the following EC Directives, of which it satisfies

the essential requisites:

- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.

- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.

- RoHS2 Risk of Hazardous Substances: EN 50581.

- ErP Energy related Products: EN 50440.

INSTALLATION NORMS (for the installer)

The installation and set-up of the water heater must be carried out by a competent person in conformity with the

applicable norms in force and with any provisions set forth by local authorities and public health bodies.

Warning: this is an open outlet appliance (no pressure) and can be installed in one point of use only. The electrical

and plumbing connections must be made in compliance with the applicable norms in force.

The appliance heats water to a temperature below boiling point. It must be linked up to a mains water supply according

to the appliance performance levels and capacity.

Before connecting the appliance, it is first necessary to:

- Check whether the characteristics (please refer to the data plate) meet the customer’s requirements.

- Make sure the installation conforms to the IP degree (of protection against the penetration of liquids) of the appliance

according to the applicable norms in force.

- Read the instructions provided on the packaging label and on the appliance data plate.

WARNING! Follow the general warnings and the safety norms listed at the

beginning of the text and keep to all the instructions given under all circumstances.

However, the thermal disinfection cycle does not kill all Legionella bacteria in the storage tank. It follows that if the

water temperature setting is less than 55°C, the Legionella bacterium infection may reoccur.

Caution: the water temperature in the tank can cause immediate serious burns. Children, disabled persons and

the aged are particularly at risk of burns. Check the water temperature before taking a bath or shower.

Product information

2,6 Kg

Refer to the nameplate

Oversink

2,182

XXS

15 dB

38,8%

Undersink

2,366

36,4%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston Piccolo Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info