719969
30
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
29
GB
Resetting the bipolar safety
In the event of an abnormal overheating of the water, a thermal safety switch in compliance with CEI-EN norms cuts
off the electrical circuit on both the power supply phases of the heating element.
To reset the operation of the appliance, proceed as follows:
- leave it to cool;
- set the knob (F fig. 6) to the maximum temperature position;
- remove the cover C by unscrewing screws D (fig. 4);
- disconnect the thermostat (T fig. 6) from the electricity mains;
- using a cross-head screwdriver, press on point A fig. 9 until you hear it click.
Remount everything in the reverse order, paying particular attention to repositioning the components correctly.
Once the aforementioned operations are complete, make sure you fill the appliance with water before powering
it.
- Avoid positioning any objects and/or appliances that could be damaged by water leaks beneath the water heater.
- Should you not use any water for an extended period of time, you should:
disconnect the appliance from the electrical supply by switching the external switch to OFF;
turn off the plumbing circuit taps.
- Hot water at above 50°C flowing out of the taps at the point of use could cause serious scalds or even death from
burns. Children, the disabled and the elderly are more exposed to the risk of burns.
- It is strictly forbidden for the user to perform any routine or extraordinary maintenance.
- Before calling the after-sales service centre for assistance in the event of a suspected malfunction, check first whether
this is due to other causes, such as for example a temporary power failure or water shortage.
See warning nos. 1 - 2 - 3
See warning no. 4 Contact a competent person for the replacement of the power supply cable.
See warning nos. 5 - 6 - 8
See warning no. 21 - To clean the outer parts of the appliance, use a damp cloth soaked in soapy water.
See warning no. 21 - To clean the outer parts of the appliance, use a damp cloth soaked in soapy water.
See warning nos. 22 - 23
!
!
!
!
!
!
USER INSTRUCTIONS
Advice for user
!
WARNING! Follow the general warnings and the safety norms listed at the
beginning of the text and keep to all the instructions given under all circumstances.
Operation
To turn the water heater on, insert the plug into the wall socket or switch on the bipolar switch.
The pilot lamp (A fig. 4) only stays on during the heating cycle; during this time, the expanding water could cause
some water to trickle from the tap: this is completely normal and does not mean the tap is faulty. Do not screw the
taps too tightly to prevent damaging their seals.
The thermostat will automatically disable the heating element as soon as the selected water temperature is reached.
During the final stage of heating, it is normal for a few cycles of thermostat starting and stopping to take place.
During normal operation, the electric heating element may make a little noise inside the appliance, which is due to
the heat exchange; the plumbing connections may also become hot to the touch.
Adjusting the operating temperature
The temperature of the water can be selected on the knob (F fig. 6) and can be adjusted from 40 to 80°C approximately.
We recommend you set the temperature of the water heater to 60°C to:
- reduce the formation of limescale;
- reduce heat dispersion;
- avoid the risk of bacteria proliferation.
To remount the heating element, the tightening torque of the bolts (A fig. 6) should be between 7 and 10 N/m. You
must respect the criss-cross type of tightening.
Once the aforementioned operations are complete, make sure you fill the appliance with water before powering
it.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ariston Piccolo wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info