748333
79
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Many presets in the MicroFreak have sequence patterns embedded in them; some of those
patterns will be paraphonic and others will use only one voice. When in Paraphonic mode
all voices in the sequence will play back; with Paraphony "OFF" only the lowest note of a
step will be played.
Notes you play on the keyboard will always have a higher priority than the notes the
sequencer plays. If you hold down two keys on the keyboard while in Paraphonic 4-voice
mode, the sequencer will only have two voices available to play back a recorded sequence.
In that case, the sequence will play back the lowest two notes in the sequence.
Note: There is only one pitch CV output at the rear of the MicroFreak. When you play back
a sequence pattern a step's lowest note will be transmitted. When playing the keyboard the
last note you play will be transmitted.
If you play chords on the MicroFreak, either with the keyboard or using the sequencer,
everything will be transmitted via MIDI including aftertouch and velocity. The four note
paraphonic limitation does not apply here: if you play a ten note chords all of that data will
be transmitted over MIDI. Notes arriving at the MIDI In port have have the same priority as
notes you play on the keyboard. If in paraphonic mode there are voices left the sequencer
will use them. It has the lowest priority.
13.1.1. Selecting and playing a sequence pattern
In a new preset the sequence will be empty. If you load a factory preset or a preset
you created before, sequences patterns A and B will sometimes contain sequencer data.
Pressing the A or B button will load the corresponding sequence pattern from RAM. Hitting
one of the A or B buttons will show “Sequence X Loaded” on the display.
You can play sequence pattern A and B alternatingly. When "play" is active, you can switch
from pattern A to B by pressing the A or B icon. The two pattern will always have the
same length inside one preset. You cannot play two sequences patterns simultaneously. The
sequence patterns you record become part of the preset you record them in.
If you want to undo the most recent recording of a sequence pattern, hold Shift and press
the icon of the sequence you want to reset to its previous state (A or B). The MicroFreak will
then load the most recently saved sequence pattern from memory and erase the existing
one. To erase a sequence pattern, hold the Sequencer A or B button and press Hold. Both
buttons will start blinking. When blinking stops, the sequence pattern is erased.
Note: When performing, it is good to know that you can erase/reload pattern A while pattern
B is playing and vice versa.
Once you've recorded a sequence pattern there is no need to press play in order to hear
them; just press a key on the keybord and the currently active pattern will start playing.
A sequence can store both notes and modulation data. More about this later.
13.1.2. The Sequencer and the keyboard
The Sequencer and the keyboard can work together in exciting ways. When a sequence is
playing in Monophonic mode and you press a key on the keyboard, the sequence will pause
and resume as soon as it detects that you are no longer holding down keys. This allows for
some innovative playing techniques like a dialogue between you playing the keyboard and
the sequence that is playing. By playing keys and lifting your fingers rhythmically, you can
augment the playing sequence in interesting ways. In Paraphonic mode the sequence does
not pause; it will continue to play and accompany your keyboard playing.
Arturia - User Manual MicroFreak - The Sequencer 74
79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arturia MicroFreak wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info