Bedienungsanleitung Ascom i75 VoWiFi Handset (Seite 27 von 63) (Englisch)

495987

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

TD 92319GB

2006-09-22/ Ver. B

User Manual

Ascom i75 VoWiFi Handset

An example can be a customized application that can be accessed from the handset. A list

of actions can be included in the message sent from the application to the handset. Data

sent from the handset can initiate the application to send the interactive message, see 5.7

Send Data from the Handset on page 21. The user can then select one action from the list.

The action can be sending a message back to the application, and/or dialling a specific

number etc.

An IM is indicated and viewed the same way as an ordinary message, see 5.2.1 Receive a

Message on page 19, but the Interactive message icon is added in front of the message. It

is saved along with other messages in the message list.

Interactive Messaging is a system dependent function.

5.5.1 Interactive Messages with Function Keys

If there are function keys specified in an Interactive Message, they will be mapped to the

Soft keys and the alphanumeric keys. Function Key ID (A) will be mapped to the left Soft

key, Function Key ID (B) will be mapped to the middle Soft key, and Function Key ID (C) will

be mapped to the right Soft key. Function key IDs (0)–(9) will be mapped to the

corresponding alphanumeric keys.

5.5.2 Interactive Messages without Function Keys

Open an Interactive Message (IM) the same way as an ordinary message. If the IM gives

you several options, mark the one you want and press “Select”. If the selected option

requests input, enter the information needed and press “Select”.

A long press on the “#- key” will change to digit input mode to facilitate entering

numbers.

5.5.3 Multilayer Interactive Messaging

Interactive messages can have multiple layers. A multilayer message have different options

defined for the soft keys. When a soft key is pressed and an option is selected new options

are defined for the soft keys depending on the previous selection.

It is the soft key options that are changed, the text message is unchanged.

5.6 Voice Mail

5.6.1 Receive a Voice Mail

A ring signal and the New voice mail icon in the display indicate that a new voice mail has

arrived. You can listen to voice mail by selecting the “Voice mail” entry in the “Messages”

menu.

5.7 Send Data from the Handset

5.7.1 Data Send

It is possible to send user entered data from the handset by pressing a pre-programmed

Hot key or Soft key, or selecting a Service. “Data send” can be used for opening a door,

starting/stopping a machine etc. The data can either be predefined, or entered after the

Hot key/Soft key is pressed or Service is selected.

The data can be predefined when programming the Soft/Hot key or Service, see 9.5.8 Edit

a Soft key on page 39 or 9.4.3 Edit a Service on page 36.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ascom i75 VoWiFi Handset Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info