495987
29
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
TD 92319GB
2006-09-22/ Ver. B
User Manual
Ascom i75 VoWiFi Handset
23
6 Alarm Operation
6.1 Acoustic Localisation Signal
A parameter in the handset determines whether or not an Acoustic Localisation Signal
(ALS) should sound after an alarm. The ALS is silenced by pressing the Mute button.
6.2 Push-button Alarm
Press the red alarm button twice within two seconds to activate the alarm. An information
text, by default “Personal Alarm”, is displayed. The alarm is sent to the alarm central that
distributes it further. After that the handset returns to stand-by mode. Note that you can
always trigger the alarm when you are speaking, editing your settings, or while the phone
is locked.
Note: The information text can be changed using a parameter in the handset.
6.3 Test Alarm
Press and hold the red alarm button until the information text is displayed, default Test
Alarm.
6.4 No-movement Alarm
Note: The No-movement alarm requires that the licence option is made available in the
handset. For information on how to add a licence, see A.2 Add an Alarm Licence on page
54.
You can activate/deactivate the alarm function in the menu, see 9.5.6 Deactivate/Activate
No-movement alarm on page 38, or by programming a Soft/Hot key as a short-cut to the
function, see 9.5.8 Edit a Soft key on page 39. The Soft/Hot key changes the state of the
alarm, i.e. if it is deactivated it will be activated and vice verse. Press the Soft key, or press
and hold the Hot key, to put the alarm in or out of operation, respectively.
The No-movement alarm on icon on your display is an indication that the No-movement
alarm is in operation.
Send No-movement alarm
The No-movement alarm will go off when you have not moved within a preset period of
time (default 30 seconds). Before the alarm is activated a warning signal sounds and the
No-movement on icon starts to flash. If you do not cancel the alarm by pressing a key, the
alarm is sent and No-movement alarm is shown in the display.
Activate No-movement alarm after sending
When a No-movement alarm has been sent, it is made active again by pressing a key or by
moving the handset.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ascom i75 VoWiFi Handset wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info