Bedienungsanleitung Aspire Tigon AIO (Seite 5 von 24) (Englisch)

737283

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Operation

Getting to know your Bowflex

SelectTech

Dumbbells

The Bowflex

SelectTech

dumbbells are shipped fully assembled, one dumbbell to a box. After carefully removing the dumbbell

from its box, there are some initial steps that should be taken to familiarize you with the function of the product, and to make sure

that all features of the dumbbell operate correctly.

Do not drop the dumbbell. Dropping the dumbbell will damage the weight plates and/or the locking mechanism, and can

cause the weight plates to disengage (drop) from the handle without warning. This can cause serious injury, and will void

the warranty.

1. After you remove the dumbbell from its protective packaging, inspect the products and packaging material for damage.

2. Push down slightly on the handle assembly to make sure it is fully seated in the base. Rotate each adjustment knob several

full rotations to make sure it turns freely in both directions. Make sure there is a click at each weight increment of the

adjustment knob. This click will help you align the knob correctly to make a weight selection.

3. The weight increments range from 4 to 41 kg (10 lbs to 90 lbs) on both adjustment knobs.

To properly select a given weight (9 kg [20 lbs] for example), rotate both adjustment knobs

until that number (9) is aligned with the arrow located on the outward edge of the Bowflex

nameplate (Fig.1).

4. After you make sure that the adjustment knob turns correctly, turn each adjustment so that the

number 4 is aligned with the arrow in the Bowflex

nameplate.

5. With both adjustment knobs set to 4, pull the handle straight up from the dumbbell. This will

remove only the handle from the base, and let all of the weight plates stay in the base (Fig.

2). The handle without plates gives the initial weight of 4 kg (10 lbs).

6. You may increase the selected weight by rotating each adjustment knob clockwise.

NOTICE: When you remove the dumbbell from the base or return it to the base, use a vertical

motion, perpendicular to the base. Do not tilt the dumbbell or move it laterally

(parallel to the base) until it is fully clear of the unselected weight plates.

Note: The dumbbell handle and weight plates are symmetrical. The handle is inserted with

either end facing the user, provided that you have selected the same weight number on

both ends of the dumbbell.

Do not lean on the dumbbell handles or use them to support your body weight , such as using

them as a base to perform a push up. Doing so will damage the weight plates and/or the locking

mechanisms, and can cause the weight plates to disengage (drop) from the handle without

warning. This can cause serious injury, and will void the warranty.

Inspect the dumbbells prior to each use. Do not use a dumbbell with worn or damaged parts.

Contact your local distributor for repair information.

There are 17 weight increments:

4 7 9 11 14 16 18 20 23 25 27 30 32 34 36 39 41

10 lbs 15 lbs 20 lbs 25 lbs 30 lbs 35 lbs 40 lbs 45 lbs 50 lbs 55 lbs 60 lbs 65 lbs 70 lbs 75 lbs 80 lbs 85 lbs 90 lbs

Note: Weight increments represent estimated values only. Exact values can vary due to manufacturing variances.

Figure 2

Figure 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aspire Tigon AIO Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Aspire Tigon AIO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info