Bedienungsanleitung Aspire Tigon AIO (Seite 6 von 24) (Englisch)

737283

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Operation

Understanding the locking mechanism function

The Bowflex

SelectTech

Dumbbell features an exclusive locking mechanism designed to ensure proper and complete selection

of the weight plates as well as to ensure weight plate retention during the workout.

Fully understand the function of this mechanism and do tests of the mechanism regularly to make sure it operates correctly.

The locking mechanism supplies two key functions:

1. The mechanism will only let the adjustment knobs turn when the dumbbell handle fully engages the dumbbell base. The

mechanism prevents deselecting (dropping) weight plates from the dumbbell when it is NOT in the dumbbell base.

2. The mechanism will lock the dumbbell handle to the base if the adjustment knobs do not fully engage the weight plate

selection. The mechanism prevents partial selection of the weight plates in which the locking pin is not fully engaged and

does not fully hold the plates.

Given the importance of this locking mechanism, it is critical that you understand how it operates, and periodically test it to make

sure it is functioning correctly.

Testing proper locking mechanism function

1. With the dumbbell handle set in the dumbbell base, turn both adjustment knobs to the

number 4. You will know you have fully and correctly selected the number when you feel

the adjustment knob settle into a notch (known as a detent). You will also hear a slight, but

audible, clicking noise that corresponds with the detent locations for each number.

2. You should be able to withdraw the handle from the base leaving all the weight plates behind.

3. With the handle removed from the base, grab one adjustment knob with your other hand and

gently attempt to turn the knob, the knob should not rotate. A locking pin in the mechanism will

have engaged the rotational assembly when the unit was withdrawn from the base. Perform

this test with all adjustment knobs.

Do not use too much force to try to turn the locked adjustment knob. Too much force can damage the locking mechanism.

4. After confirming the proper function of the locking mechanism as described above, return and fully insert the dumbbell

handle back into the base assembly.

5. With the handle back in the base, turn the adjustment knob on one side to a position that is between the numbers 4 and 7.

This represents an incomplete weight selection where the adjustment knob has not fully selected a weight and the knob is

in-between the selection detents (clicks).

6. With the selection knob in this improper position, gently attempt to lift up on the handle to remove it from the base. You

should find that the handle is locked to the base and cannot be removed with light pressure, as it can normally.

7. Return the improperly selected adjustment knob to a full and proper weight selection and assure that the dumbbell handle

can once again be removed.

8. Repeat this test for all adjustment knobs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aspire Tigon AIO Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Aspire Tigon AIO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info