Heating curve for underfloor heating systems
or other static heating surfaces
Normal standard heating curves for radiators
Heating curves for convectors
Special heating curves for ventilators with
high starting temperatures
1.0 0. . . 1.10
Application
Setting value
1.30. . .2.20
3.00. . . 4.00
4.00. . .10.0
Page 29
1. 30
HHEEAATT.. SSYYSSTTEEMM
Adaptation to the heating system
Setting range: 1,00 to 10.0
Factory preset: 1,30
HHCC
Applications:
The following setting values are recommended for the below-
mentioned applications
This parameter refers to the type of the heating system
and has to be adapted to the power characteristic of the
corresponding consumer (underfloor systems, radiator,
convector). The setting value specifies the curvature of the
heating curve of the selected weather dependent heating
circuit and compensates the system-related efficiency los-
ses at lower temperatures by a progressive heating curve
in conformity with the adjustment.
Heating circuit name
This is used to assign an individual, 5 character, abbrevia-
ted name to each heating circuit.
No individual name is assigned if the setting "empty" is
used. The default abbreviated name appears.
• The character that blinks can be altered using the rotary
knob according to the code number and accepted by
pressing the knob once. The remaining characters can
be altered in the same way.
• The individual heating circuit name display appears
- in the menu
- in the parameter tree
- in the info level
HHKK-NNAAMMEE
HHKK-NNAAMMEE
