Bedienungsanleitung ATAG HIDD8472LV (Seite 35 von 116) (Deutsch, Englisch, Holländisch, Französisch)

692524

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Appliance description

3.1 Operating the hob with the sensor keys

The induction hob is operated with slider touch control

sensor keys. The sensor keys are operated as follows:

lightly touch a symbol on the surface of the ceramic glass

plate. A buzzer will indicate when the controls have been

operated correctly.

The touch control sensor key will then be indicated as

“key”.

ON/OFF key

(7)

This key is used to switch the entire hob operational. It is,

as it were, the main switch.

Power setting display (9)

The power setting indicator shows the power setting

which has been selected, or:

.................. Residual heat

.................. Power boost

..................Pan recognition

.................. Automatic boost function

.................. Pause function

................... Keep-warm function

...................Childproof lock

Symbols

......... Keep-warm levels 42°C/ 70°C/ 94°C

.................. Timer function, automatic switch-oﬀ device

.................. Minute minder

.................Bridging function

Lock key (10)

The lock key can be used to lock all of the keys.

Autoprograms key (11)

For melting, holding and simmering

Power boost in the sensor ﬁ eld

The power boost setting makes additional power

available for induction cooking zones.

PAUSE key (13)

The PAUSE function can be used to brieﬂ y stop the

cooking process.

Recall function (13) (recovery function)

The most recent setting can be recovered if the hob is

switched oﬀ unintentionally.

Fan Indication

Clean the grease ﬁ lters

Replace / regenerate the charcoal ﬁ lter

Automatic delay stop deactivated

Automatic delay stop activated

Fan symbols

Extraction switched on

Extraction in automatic delay stop mode

3.2 Worth knowing about the slider (sensorﬁ eld)

In principle, the slider functions the same as the touch

controls; the only diﬀ erence is that you can put your

ﬁ nger on the glass ceramic surface and then move it

around. The sensor ﬁ eld recognises this movement

and raises or lowers the display setting (power level) in

accordance with the movement.

The term sensor ﬁ eld is used to mean slider from now on.

What must be observed when operating sensor

ﬁ elds?

Your ﬁ nger should not be placed ﬂ at onto the glass

ceramic surface in order to avoid adjacent keys/sensor

ﬁ elds from reacting by mistake.

Press the sensor ﬁ eld lightly or move your ﬁ nger

around

You can press the sensor ﬁ eld very lightly with your

ﬁ nger; when this is done the setting on the display (power

level) will gradually change.

When you put your ﬁ nger on the sensor ﬁ eld and then

move it to the left or right, the display setting will change

progressively.

The faster the movement, the faster the change in the

display.

Sensor ﬁ eld

unsuitable right

touch move

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG HIDD8472LV Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG HIDD8472LV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info