Bedienungsanleitung Atika KGS210N (Seite 15 von 141) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

520784

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

the workroom, other noise sources, etc. e.g. the number of machines

and other adjacent processes. The permissible workplace values can

also vary from country to country. This information should however

enable an improved assessment of the danger and risk to be carried

out.

Vibrations

Vibration: 6.0 m/s²

Measuring uncertainty K: 1.5 m/s²

The indicated vibration emission level has been measured ac-

cording to a standardised test method and can be used to com-

pare power tools.

It can also be used for an initial estimate of exposure.

The vibration emission level can differ from the indicated value

during actual use of the power tool depending on the manner of

usage.

Try to minimise the exposure to vibration. Precautions for mini-

mising exposure to vibration include wearing of gloves when

operating the machine and limiting of operation cycles. For this,

all portions of the operating cycle have to be considered (e.g.

times during which the power tool is cut off and times during

which it is switched on, but runs without load).

Normal intended use

 The device is suitable to cut wood and other wood-type

materials (e.g. particle boards) in the house and hobby field.

 The device is suitable for crosscuts, inclined cuts, mitre cuts

and double mitre cuts.

 The cutting of round material and irregularly shaped materi-

als (rickers, poles, fire wood etc.) is not permitted since the-

se work pieces cannot be held securely.

 Only work pieces that can be put down securely and held

with clamping devices may be processed.

 The use of saw blades made of HSS steel (high-alloy high

speed steel) is not permitted since this steel is hard and brit-

tle. Risk of injury through saw blade breakage and expulsion

of saw blade pieces.

 The intended usage also includes compliance with the oper-

ating, servicing and repair conditions prescribed by the man-

ufacturer and following the safety instructions included in the

instructions.

 The relevant accident prevention regulations for the opera-

tion as well as the other generally acknowledged occupa-

tional medicine and safety rules must be complied with.

 Any other use is deemed not to be use as prescribed. The

manufacturer is not liable for any type of damage resulting

from this: the user bears the sole risk.

 Independently made alterations to the circular saw preclude

any liability of the manufacturer for resulting damages of any

kind.

 The circular saw may only be equipped, used and serviced

by persons who are familiar with these and have been in-

structed in the hazards. Repair works may only be carried

out by us or by a customer service agent nominated by us.

 The machine may not be used in a potentially explosive

environment or be exposed to the rain.

 Metal parts (nails, etc.) must be removed from the timber to

be sawn.

Residual risks

Even if used properly, residual risks can exist even if the rele-

vant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety information” and

the “Intended usage” as well as the whole of the original instruc-

tions are observed.

Observing these instructions, and taking proper care, will reduce

the risk of personal injury or damage to the equipment.

 Danger of injury of fingers and hands by the tool (saw blade)

or work piece, e.g. when replacing the saw blade.

 Injury from parts of the workpiece spinning off.

 Throwback of the workpiece or workpiece parts.

 Breakage and expulsion of saw blade.

 Risk from electricity, by using non-standard electrical con-

nections.

 Touching live parts of opened electrical components.

 Impairment of hearing when working on the machine for

longer periods of time without ear protection.

 Emission of harmful timber dust when operating without

exhaust suction.

In addition, in spite of all the precautionary measures taken,

non-obvious residual risks can still exist.

Safety instructions

Wood processing machines can be dangerous when

used improperly. The use of electrical tools requires the

observation of basic safety precautions to eliminate risk of

fire, electrical shock and personal injuries.

Before commissioning this product, read and keep to the

following advice. Also observe the preventive regulations of

your professional association and the safety provisions

applicable in the respective country, in order to protect

yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using

it, by reading and understanding the original instruc-

tions.

 Be observant. Attend to what you do. Start working with

rationality. Do not use the device when you are tired or

under the influence of drugs, alcohol or medicaments.

One moment of carelessness when using the device can

result in serious injuries.

 Avoid unusual posture. Ensure that you have stand in a

secure standing position and maintain your balance at all

times. Do not lean forward.

 Wear suitable work clothes:

Atika KGS210N Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info