Bedienungsanleitung Atika KGS210N (Seite 16 von 141) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

520784

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− ear protection (sound pressure levels at the workplace

usually exceed 85 dB(A)

− safety goggles

− Dust mask with work activities generating dust

− Gloves when replacing the saw blade

 Operate the saw only on

− firm

− level

− slip-free

− vibration free surface

 Keep your workplace in an orderly condition! Untidiness can

result in accidents.

 Take into consideration environmental influences:

− Do not expose the machine to rain.

− Do not use the machine in humid or wet environment.

− Ensure that the workplace is well lit.

− Do not use the machine near inflammable liquids or gas-

es.

− Connect the mitre crosscut saw to a dust collection de-

vice when cutting wood.

 Never leave the machine unattended.

 Persons under 18 may not operate the machine.

 Keep other persons away.

Do not allow other persons, especially children, to touch the

tool or cable.

Keep them away from your working area.

 Avoid any inadvertent starting. Make sure that the switch is

off before connecting the mains plug with the outlet socket.

 Assume the correct work posture. Stand to the front at the

operator side facing the saw and to the right of the saw blade

alignment.

 Only begin cutting after the saw blade has reached its re-

quired rotational speed.

 Make sure that the arm swivel device is safely secured when

sawing a mitre joint.

 Do not overload the machine! You work better and safer in

the given performance range.

 Do not use machines for high-duty work for which they are

not rated.

 Only operate the machine with complete and properly at-

tached protective devices and do not make any modifications

to the machine that may interfere with safety.

Make sure that the lower protective cover can move freely.

 Do not use any cracked saw blades or such that have

changed their shape.

 Malfunctions of the machine including defective guards or

saw blades must be reported to the person responsible for

safety immediately after detection.

 Use only sharp saw blades since dull saw blades not only

increase the danger of back kicking but also cause exces-

sive load on the motor.

 Do not use saw blades made of high speed steel (HSS)

since this steel is hard and brittle; use only tools according to

EN 847-1.

The use of other tools and other accessories may pre-

sent a risk of injury to you.

Pay attention that the saw blade conforms to the dimensions

specified under "Technical Data" and is suitable for the work

piece material.

 Use only fine-tooth saw blades to cut thin or thin-wall work

pieces.

 Only saw one work piece at a time. Never saw several work

pieces at the same time or do not bundle several individual

pieces together for cutting. There is danger that individual

pieces may be caught by the saw blade in an uncontrolled

manner.

 Do not use the saw for purposes it is not intended for (see

intended use).

 Do not use the machine for cutting materials other than

those indicated by the manufacturer.

 Remove all nails and metal objects from the work piece prior

to sawing.

 Pay attention that the work piece does not contain any ca-

bles, ropes, cords or the like.

 Use clamping devices or a vise to secure the work piece.

 Only cut work pieces with dimensions that allow secure

holding while sawing.

 Always keep sufficient distance to the saw blade. Maintain

sufficient distance from driven components during operation.

 The saw blade runs after. Wait until the saw blade has come

to a standstill before remove splinters, chips and waste.

 Do not slow the saw blade down by applying lateral pressure

to it.

 Switch the machine off and remove the mains plug from the

socket when

− carrying out repair works

− maintenance and cleaning

− removal of faults (this also includes the removal of

jammed splinters)

− checks of connecting lines, whether these are knotted or

damaged

− Transporting the machine

− Changing the saw blade

− Leaving the machine (also for short-term interruption)

 Maintain your machine with care:

− Keep your tools sharp and clean in order to be able to

work better and safer.

− Follow the maintenance instructions and the instructions

for tool exchange.

− Keep handles dry and free of oil and grease.

 Check the machine for possible damage:

− Before further use of the machine the protection devices

or slightly damaged parts must be checked carefully for

their proper and intended function.

− Check whether the movable parts function perfectly and

do not stick or whether the parts are damaged, All parts

must be correctly installed and fulfil all conditions to en-

sure perfect operation of the saw

− Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

− Damaged or illegible security labels have to be replaced.

Atika KGS210N Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info