Bedienungsanleitung Atika KS2000 (Seite 20 von 158) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Finnisch)

475722

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

 Primary users

Persons working for the first time with the chain saw

must obtain a practical instruction to the use of the

chain saw and the operator protection equipment by an

experienced operating person. Primary users shall first

of all practice cutting of round timber on a sawhorse or

a rack.

 Be observant. Attend to what you do. Start working with

rationality. Do not use the device when you are tired or

under the influence of drugs, alcohol or medicaments.

One moment of carelessness when using the device

can result in serious injuries.

 Make yourself familiar with the equipment before using

it, by reading and understanding the operating

instructions.

 Do not use the machine for unsuitable purposes (see

“Normal intended use”).

 Avoid abnormal posture. Provide a safe standing

position and keep at any time the balance.

 Wear suitable work clothes:

− do not wear loose-fitting clothes or jewellery; they

can catch in moving parts.

− slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− ear protection

− protective goggles or face protection

− gloves

− certificated hardhat in situations where injuries to

the head must be expected (e.g. when chopping or

releasing trees).

 We recommend wearing a leg protection.

 Keep your workplace in an orderly condition!

Untidiness can result in accidents.

 Take into consideration environmental influences:

− Do not expose the chain saw to rain.

− Do not use the chain saw in humid or wet

environment.

− Delay the work in case of disadvantageous

weather (rain, snow, ice, wind) – increased risk of

accidents!

− Provide for good illumination.

− Do not use the chain saw near inflammable

liquids or gases.

 Never leave the saw unattended.

 For breaks the chain saw has to be put down in such a

manner that no person will be endangered. Assure the

chain saw against unauthorised access.

 Persons under the age of 18 must not operate the

chain saw.

 Keep other persons away.

 The operator is responsible for accidents or risks which

occur to other persons or their properties.

 The operator is resposnible to third persons within the

area of operations.

 Keep children away.

 Do not allow other persons, especially children, to

touch the tool or cable.

Keep them away from your working area.

 Protect yourself against electric shocks. Avoid body

contact with grounded parts (e.g. pipes, heating

apparatus, cookers, fridges etc.)

 Do not use any cracked saw chains or such that have

changed their shape.

 Use only well sharpened saw chains as edgeless

saw chains increase not only the risk of backstrokes

but also charge the motor.

 Start cutting only when the saw chain has reached the

full number of revolutions.

 When switching on the chain saw must be supported

and held safely. Chain and sword must stand free.

 Do not overload the machine! You work better and

safer in the given performance range.

 Only operate the machine with complete and correctly

attached safety equipment and do not alter anything

on the machine that could impair the safety.

 Do not modify the device or parts of the device

respectively.

 Do not hose down the device with water. (origin of

danger electric current).

 Keep the device in a safe place. Keep not used

devices in a dry, closed and for children inaccessible

room.

 Switch the machine off and remove the mains plug

from the socket when

− contact of chain saw with soil, stones, nails or other

foreign substances

 check immediately chain and sword

− carrying out repair works

− maintenance and cleaning

− removal of faults

− cut through connection cables

− checking of connection cables whether

they are swallowed or damaged

− transport

− clamping again the chain

− chain change

− leaving of machine (also for short-term interruption)

 Maintain your chain saw with care:

− Keep your tools sharp and clean in order to be able

to work better and safer.

− Comply with the maintenance instructions and the

advices for lubrication and for the tool change.

− Keep the handholds dry and free from resin, oil and

grease.

 Check the machine for possible damage:

− Before further use of the machine the protection

devices or slightly damaged parts must be checked

carefully for their proper and intended function.

− Check whether the movable parts function

perfectly and do not stick or whether the parts are

damaged, All parts must be correctly installed and

fulfil all conditions to ensure perfect operation of the

chain saw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika KS2000 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info