Bedienungsanleitung Atmos A25 (Seite 58 von 96) (Englisch)

810409

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

www.atmos.cz

58-EN

Operation and maintenance manual - EN

but runs permanently both during the drawing of the ignition amount and during both the

times T4 and T6. Thus, the other external conveyor runs continuously and works independently

of the status of the actual output for the external worm conveyor. This means that if the output

to the main external conveyor from which pellets directly fall to the burner gets damaged, the

reserve will keep working independently. This function can be used in cases when you need to

control another external conveyor that supplies (feeds) pellets from a larger distance to a pellet

bin at the boiler from which the main external conveyor draws pellets to supply them directly to

the burner. Caution - the other external conveyor must always be controlled with an additional

level sensor (level meter) that will maintain the level of pellets in the pellet bin at the boiler.

j) S14 = 10….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor, but with the difference that it does not

cycle, but runs permanently both during the drawing of the ignition amount and during

both the times T4 and T6. Thus, the other external conveyor runs continuously, but it works in

dependence on the status of the actual output for the external worm conveyor. This means that if

the output for the external conveyor from which pellets fall directly to the burner gets damaged,

the reserve will be switched off automatically. This function is convenient in cases when you

need to control another external conveyor that supplies (feeds) pellets from a larger distance to

a pellet bin at the boiler from which the main external conveyor draws pellets to supply them

directly to the burner. Caution - the other external conveyor must always be controlled with an

additional level sensor (level meter) that will maintain the level of pellets in the pellet bin at the

boiler. This is a similar function to S6 = 9, but with a higher degree of safety.

k) S14 = 11….. Reserve function for controlling boiler exhaust fan for DCxxSP(X), CxxSP,

ACxxSP boiler types when the function for automatic start after wood is burnt out is activated.

This function ensures that boiler exhaust fan is running only during wood burning after the wood

is burnt out. When the burner is run on pellets, the boiler exhaust fan remains switched off. This

function is used if you do not need or want to use the boiler exhaust fan while the burner is running.

Install the AD02 module under the instrument hood of the boiler and connect it electrically between

the boiler terminal board and the extraction fan, see the wiring diagram.

WARNING – this is not a standard setting for DCxxSP(X), CxxSP, ACxxSP boilers with

the function of automatic start

(AUTOSTART – S34 = 1 or S34 = 2) after wood is burnt out (standard setting is S6 = 4).

l) S14 = 12…..Reserve function for direct control of pump in the boiler circuit from the burner

regulation (boiler terminal board). This function controls the pump in the boiler circuit without

using AD02 or AD03 modules. This is applicable only for boilers that do not allow heating with

wood (not even in emergency situations). E.g. D14P, P14, D21P, P21, D25P, P25, D80P, P80,

DxxPX, PXxx. Pump output must be switched to reserve R2 on the boiler terminal board and the

TK sensor must be installed before this function can be activated. After activation, S37, S38, S39,

S40 temperature parameters must be checked and configured.

m) S14 = 13…..Reserve function is the reverse output function for controlling the pump in

the boiler circuit from the burner regulation (output cable from boiler with a connector – white

inside) via AD02 or AD03 modules. This function controls the pump in the boiler circuit using

AD02 or AD03 modules ranged into a set with pump thermostat installed into the boiler panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A25 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info