Bedienungsanleitung Atomos NinjaV (Seite 41 von 67) (Englisch)

769373

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Atomos Ninja V – User Manual Edition 1: Aug 2021 39

The preset will appear on the Program feed and be locked to this

input so that whenever you switch to that input in switcher mode, the

graphics in the selected preset will appear. This is especially useful

where you have multiple speakers, as they can all have a lower thirds

graphic with their name and details appear whenever you cut to them.

You can deactivate an overlay in both program and preview modes,

by holding the the button until the red light changes to white.

When in F3 Overlays mode, pressing the settings button will open

the Overlays menu page. To create or adjust the graphical overlay

presets and for more settings, refer to the Overlays menu page

section.

• F4 SWITCHER

In this mode, the 1-4 pad buttons preview and switch between the

inputs. When F4 is initially selected, it will turn red and One Touch

switching mode will be enabled. Tapping/pressing the F4 key again

whilst it is red, will cause the F4 button to become green and the Two

Touch switching mode will be enabled. In this mode, you can preview

inputs before actually switching to them.

Tapping on another input via the 1-4 pad buttons or on the multiview

screen in this mode, will place a green preview border around the

chosen input on screen, and the corresponding input selection button

on the AtomX CAST will also be green. The selected input will also

be displayed on a connected display in Preview mode. If you select

another input instead, the selected input will be previewed instead.

This allows you to literally preview your inputs before you cut to them

in the program feed.

A second tap on the same input on the display or on the input

selection button whilst they are green, will turn it red and cut to that

input immediately. If you do not want to switch to the input being

previewed, tap on the currently selected input again on the Ninja V

display or press the input selection button that is red. Selecting the F4

key whilst green will return to One Touch switching mode.

When in F4 Switcher mode, pressing the settings button will open the

Switcher menu page. For more information on switching settings, refer

to the Switcher menu page section.

Function ICONS F1- F4: These icons have the same effect as the physical

F1-F4 function buttons on AtomX CAST. Tapping the F1-F4 icons or

pressing the physical F1-F4 buttons will allow you to use the four physical

1,2,3,4 pad buttons on the unit to switch between options in the selected

mode. The following refers to the icons on screen, as well as the physical

buttons on the unit.

• F1 PiP (Picture in Picture)

In this mode, the 1-4 buttons act as a PiP switcher. Once F1 has

been selected, you can use the pad buttons to select an input to use

as a PiP over the Program Out. The currently selected input button

on AtomX CAST will be red to indicate it is live. Pressing one of the

other input buttons will turn them yellow, and select that source to be

displayed as a picture in picture over the current program output.

Press one of the other pad buttons to use that input as a picture in

picture instead. Pressing the input button whilst it is yellow or pressing

the red input button, will turn off the PiP effect on the program out.

When in F1 PiP mode, pressing the settings button will open the PiP

menu page. For more settings in relation to the PiP function, refer to

the Picture in Picture menu page section.

• F2 AUDIO

In this mode, the 1-4 pad buttons act as an audio switcher. Once F2

has been selected, you can then use the input selection pads 1-4

to switch between the audio from the 4 x HDMI inputs connected to

AtomX CAST. The selected input button will turn red when pressed.

Pressing the pad button whilst it is red, will switch to AFV (Audio

Follows Video) mode, and the button will turn blue. Pressing on the

selected input button when blue will switch to the audio from the

selected input again.

When in F2 Audio mode, pressing the settings button will open the

Audio menu page. For more settings in relation to Audio sources, refer

to the Audio menu page section.

• F3 OVERLAYS

In this mode, the 1-4 pad buttons act as a graphics switcher. Once F3

has been selected, pressing one of the input selection pads 1-4 will

turn the selected pad button green and and apply the overlay to the

Preview output of the Ninja HDMI ouput. This allows you to preview

each of the graphical presets over the current input. When you decide

on the preset to use, press and hold the green input button to turn the

button red and lock that graphical preset to the input.

You can change the size, position and opacity of the PiP whilst it is

live, by using the PiP menu page.

8. Using the AtomX CAST - Main Screen

If the F2 function is used as described above when Mic/Line is

selected in the audio menu page, the Audio Source will switch to

HDMI Input mode.

If you have selected analog audio input, none of the pads will be

illuminated red.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atomos NinjaV Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atomos NinjaV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info