810499
37
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
37
Option Submenu Indication
Information
Test of device O
2
scales
End of the test (+, –)
After pressing the „+“ button is the text „calibrate“
displayed
The calibration takes approx.600 seconds.
Automatic calibration is done only in the case that
the boiler did not burn for 48 hours and the
operating time of the sensor is higher than 200
hours. By the manual setting there must be no fire
in the boiler, nor theglowing rest of the fuel! If it is
not necessary to adjust the scale, press „ĸ“ and
the next step is displayed.
Note: For quick exit from menu press „+“ and „–“ at
once.
Flue gas fan
End of the test(+,–)
By pressing +
start the flue gas fan
By pressing – stop the flue gas fan
By pressingĸselect the next point of the test
Circuit pump
End of the test(+,–)
By pressing +
start the circuit pump
By pressing – stop the circuit pump
By pressingĸselect the next point of the test
Primary motor
End of the test(+,–)
By pressing +
open the primary air flap
By pressing – close the primary air flap
By pressing ĸ select the next point of the test
Secondary motor
End of the test (+,–)
By pressing + open the secondary air flap
By pressing – close the secondary air flap
By pressingĸselect the next point of the test
Illumination
End of the test (+,–)
By pressing + turn the text display illumination on
By pressing – turn the text display illumination off
By pressingĸselect the next point of the test
Indicator light 1
End of the test(+,–)
By pressing +
turn the
indicator light
1 on
By pressing – turn the indicator light1 off
By pressingĸselect the next point of the test
Indicator light 2
End of the test (+,–)
By pressing +
turn the
indicator light
2 on
By pressing – turn the indicator light2 off
By pressingĸselect the next point of the test
Indicator light 3
End of the test (+,–)
By pressing +
turn the
indicator light
3 on
By pressing – turn the indicator light3 off
By pressingĸselect the next point of the test
Safety test
Setting
END
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATTACK DPX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ATTACK DPX

ATTACK DPX Zusatzinformation - Deutsch - 21 seiten

ATTACK DPX Bedienungsanleitung - Deutsch - 48 seiten

ATTACK DPX Zusatzinformation - Englisch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info