Bedienungsanleitung Audiolab 8000AP (Seite 11 von 24) (Englisch)

496152

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

7a: Setting Up the 8000AP - 1

Getting Started

Configuring the 8000AP

Read this manual thoroughly so you get to understand the

main controls of the 8000AP and how they work.

• Switch on all source units (and the TV monitor if used).

• Connect the 8000AP to the mains power and switch on.

• Switch the unit on via tye mains switch on the rear panel.

Press the key on

the handset or the front panel.

• Now switch on the power amplifier/s.

When setting up your unit for the first time the process will be

simplified if you run the as this will ensure

you enter all the essential parameters required.

Once the required settings are input and saved, you may alter

them at any time. Changes will be retained when the unit is

switched off or even if the mains power is removed, provided

they have been saved.

You must connect your television to the output in order

for the on-screen information to be displayed.

The QSet menu enables you to set basic parameters of the

8000AP from the front panel without using a TV connection.

The QSet menu is intended for use when the 8000AP is

operational. The OSD set-up menus contain items absent in

the QSet menu and vice versa, so both menus should be

enabled if you wish to take advantage of the full range of set

up possibilities featured in the 8000AP.

• Make sure your power amplifier/s are switched off.

NOTES:

The power LED will illuminate, the front panel display window

will show the Model No and the software version.

The 8000AP will then go into Standby.

To bring the unit out of standby: Standby

On Screen Display Menu

On-screen Set-up

OSD

QSet (Quick set)

• Press the keys to select

• Press

• Press the keys to select

• Press the keys to toggle or

If you select No further action is needed.

If you select You will be

asked to set the bass cut

frequency:

• Press to select 50Hz,

80Hz, 100Hz, 120Hz.

• Now press to select

įĬ

ǡǠ

įĬ

“Speaker Sizes”

ENTER

“Speaker Sizes”

Large Small

Large:

Small:

Centre

Do you have a centre

speaker?

After setting up the size and bass parameters of the

centre speaker:

Entering and Navigating the Set Up Menu

Loudspeaker set-up

The on-screen set-up menus are operated by the handset.

• To enter set-up mode, press the key.

You may need to set

the TV system in the QSet menu. Refer to Page 19

Press the keys to navigate

the cursor to the desired option.

Press ENTER to access the sub-

Press BACK to jump back up to

the front page

Press the MENU key to exit the

OSD menu and save the setting.

If you have not made any changes to your settings you will

simply exit the on-screen menu system.

The 8000AP factory settings allow you to operate

your system “straight out of the box” but the unit will not

perform at its best until you fully set it up. Also the pre-set

configurations may not correspond to your system.

You will be asked to enter which speakers are present in your

system, whether they are “Large” or “Small”. If you select

“Large” the full bass range will be delivered to the speakers. If

you select “Small” you will be asked to enter the frequency at

you wish to cross them over to the sub-woofer. (refer to your

loudspeaker manuals for details)

NAVIGATING THE MENUS

NOTE:

If the Menu screen does not appear:

įĬ

Page 9

Audiolab 8000AP

V 3.20 HD0.35

ENTER

BACK

If you select for the front

speakers you may only select

Small

Small Noneor

If you select for the

front speakers you may select

Large

orLarge, Small, None

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiolab 8000AP Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info