Bedienungsanleitung Audiolab 8000AP (Seite 16 von 24) (Englisch)

496152

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5.1

8b: Operation - 2

Digital Modes

Selecting an Analogue Input

The 8000AP will detect and display the format of the source

material received. Press the MODE key on the handset or

front panel to cycle through the options relevant to that

format. For example, when receiving Dolby Digital 3/2.1

(5.1) you have the option to apply “EX” processing to create a

back channel or “Stereo Downmix” if you just want to listen to

2 channels.

If, for any given input source, a mode option is changed the

8000AP will remember this change and use the last option

applied whenever the same encoded material is detected.

There are four Analogue inputs:

Additionally there is a input and a input.

may be selected by pressing the

appropriate input keys on the remote handset or by pressing

the button on the front panel until the desired

source is shown in the display window.

allows a tape monitor function (if you have a

three head recorder).This enables you to compare the quality

of a tape recording to the original at the time of recording.

The selected analogue input, the left and right channel of the

5.1 input or the left and right channel of a processed digital

signal are connected to the output when you

select the relevant input.

You may listen to the analogue tape input by pressing the tape

key on the remote control, or the tape button on the front

panel of the 8000AP.

routes the 5.1 analogue inputs on the rear

panel directly to the volume control on the 8000AP. When you

select this input you will hear a relay operate as the input is

selected and all processing functions are disabled.

When this input is selected you can only alter the volume and

balance. You can also trim the channel parameters via the

OSD menu.

VCR, SAT, TV, AUX.

TAPE 5.1 bypass

An analogue source

analogue

The TAPE input

TAPE OUT

The 5.1 input

Note: The titles of the analogue inputs are descriptors: all the

analogue inputs are identical as are the digital optical inputs

and the two HDMI inputs.

Analogue Screen Displays and Modes

Active Channels

The four regular analogue inputs and the Tape input all

operate in the same way.

Pressing the MODE button will invoke several matrixed post

processing modes. With the exception of PLII Movie

DTS Neo 6 Cinema, parameter adjustments for the other

modes can be accessed in the Setup menu. (

The options available will reflect only your chosen

loudspeaker configuration. For example, if you only have

Stereo loudspeakers or have enabled only the Front

loudspeakers the available options will default to Stereo only.

All processing modes are disabled when this input is selected

The Active channel lights tell you which outputs, at any given

moment, have audio present.

The basic operating mode is 2 Channel Stereo.

5.1 bypass input

Dolby

and

See Page11).

NOTE:

centre

subwoofer/LFE

front rightfront left

surround rightsurround left

back rightback left

AUX

VCR

SAT

analogue

tape

TAPE

5.1 bypass

AUX VOL -30dB

ANALOG Stereo

AUX VOL -30dB

ANALOG PLII Movie

AUX VOL -30dB

ANALOG PLII Music

AUX VOL -30dB

ANALOG NEO:6 Cinema

AUX VOL -30dB

ANALOG NEO:6 Music

5.1 Bypass VOL -30dB

Page14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiolab 8000AP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info