Bedienungsanleitung Audiosonic SCZT2 (Seite 23 von 32) (Englisch)

618699

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

VQT2R71

Functions and settings

 Setup menu items

• ✽ appears only when audio adjustment can be made.

• Select “EXIT ” and press [OK] to finish the setup mode.

Adjusting sound quality

You can adjust the level of bass and treble.

This setting is effective only when you perform stereo playback

of 2-channel analogue and PCM signals (during Dolby Virtual

Speaker and Dolby Pro Logic

are off).

This setting is not displayed in other conditions. Be sure to make

the setting in the above condition.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (➜ above)

2. Press [

][

] to select “BASS ” or

“TREBLE ” and press [OK].

3. Press [

][

] for adjustment, and press

[OK].

Adjustment range: –6 to +6

Factory setting: 0

4. Press [ RETURN] several times to select

“EXIT ” and press [OK] to ﬁ nish the

setting.

Adjusting the volume balance of

front speakers

You can adjust the balance of the front speakers.

1. Press and hold [–SETUP, OFF] for about

2 seconds.

The setting items are displayed. (

➜

above)

2. Press [

][

] to select “BALANCE ” and

press [OK].

3. Press [

][

] for adjustment, and press

[OK].

L : Front left

R : Front right

Move the bar to left and right on the display to adjust.

• As the bar gets closer to “L ”, the sound moves to left

front.

• As the bar gets closer to “R ”, the sound moves to

right front.

4. Press [ RETURN] several times to select

“EXIT ” and press [OK] to ﬁ nish the

setting.

Note

• The bar indication is approximate.

• When using headphones, you cannot adjust the volume

balance.

Adjusting the surround speaker

output using the test signal

You can make this setting when using the surround speakers.

You can adjust the surround speaker volume by outputting the

test signal.

1. Press [TEST] to output the test signal.

Speaker display

L : Front left, R : Front right,

RS : Surround right, LS : Surround left

• The test signal is output from one speaker at a time for two

seconds in the following order.

TEST L

→

TEST R

→

TEST RS

→

TEST LS

2. Press [VOL +, –] to adjust the volumes

of front speakers to the normal listening

level.

Adjustment range: 0 (Min) to 50 (Max)

3. Press [CH] to select surround speakers

for adjustment.

4. Press [SPEAKER LEVEL +, –] to adjust

each speaker’s output level.

Adjustment range: RS, LS : –10 to +10

• The test signal comes from the speaker being

adjusted.

• The test signal is output again in above the order 2

seconds after adjustment.

 Repeat steps 3 and 4 to adjust the level of each speaker.

5. Press [TEST] to stop the test signal.

• You can check the audio output of the front speakers.

(

➜

page 16) (When the surround speakers are not used, only

“TEST L ” and “TEST R ” are displayed and the test signal is

output alternately.)

• To adjust the volume balance of left and right front speakers,

see “Adjusting the volume balance of front speakers”

(

➜

right).

• Even if you adjust each channel level in this adjustment, each

channel level setting in each SFC mode (

➜

page 19) does

not change.

• When you make this adjustment, Dolby Virtual Speaker

functions. When playing 2-channel sources, Dolby Pro Logic

also works in conjunction. (➜ page 19)

• To adjust the bass volume, do not output the test signal for

adjustment. (➜ page 22)

Note

“REMOTE” “

INPUT MODE

”

“RESET”

✽

“BASS”



✽

“TREBLE”

✽

“BALANCE”

“SPEAKERS”

✽

“DISTANCE”

✽

“STB AUDIO”

“7.1CH VS”

“HDMI” “

SOUND DLY

”

“DUAL PRG” “DRCOMP” “

ATTENUATOR

”

“EXIT”

Play

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic SCZT2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audiosonic SCZT2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info