Bedienungsanleitung Audisse Netbox (Seite 14 von 92) (Englisch)

742551

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Keep network connected?

Network settings

Wlan region

Europe

Australia

SSID

Jones family

[WPS]Paul’s network

Smith

[Rescan]

SSID

[WPS]Paul’s network

Smith

[Rescan]

[Manual config]

Network wizard

Scanning...

Network settings

8. You will then need to set ‘Keep network connected’. If you need to be able to remotely control

the radio even when it has been put into standby, rotate the

TuningControlRotary

to high-

light ‘YES’ to activate this function or ‘NO’ to deactivate this function. You can also choose

to keep the network connected by using the ‘Keep network connected’ option in the network

setting menu. In the standby mode display either the WiFi signal indicator is shown with or

without a cross through it according to the chosen network settings.

9. The display will then show a list of WiFi regional options for the network set up. Rotate the

TuningControl Rotary

to highlight the required region and then press the Tuning Control

Rotary to select it. Your radio will then scan for available WiFi networks.

10. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short

while the display will show a list of the available WiFi networks.

11.Youwillrstneedtoidentifyyournetworkinthelistofnetworknamespresentedbythe

Network Wizard. If no networks are found then you may have to get your wireless router

working (please see the instructions supplied with it) or you may be too far from the router.

When the radio finds your wireless network, it displays the Network Name (SSID) for the

wireless access point on the screen. This is a name that is allocated to the access point in

your router by the person who set up the network – for example: ‘Jones family’ or ‘Paul’s

network’. If the router supports WiFi Protected Setup, then ‘[WPS]’ will be shown in front of

theSSID.Itispossible,andinsomelocationshighlylikely,thatyourradiowillndmorethan

one wireless network, in which case you should choose which one you need to connect to.

12. Rotate the

TuningControlRotary

to see the SSID for each wireless network that has been

found. If your network is shown proceed to step 14. If it is not shown then proceed to step

13. If you make a mistake at any point, use the Backward button to go back to the previous

screen.

13.Ifyournetworkisnotfound,itmaybebecausetherouteriscongurednottobroadcastthe

SSID. You should then use the

TuningControlRotary

to highlight and select the ‘[Manual

cong]’optioninordertoenterthenetworkdetailsmanually.Thisisdescribedin ‘Manual

NetworkConguration”.Ifyournetworknameisbeingbroadcast,anditwasnotfound,then

try re-scanning press the Backward button), and if necessary try moving your radio to a

location closer to your access point/router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audisse Netbox Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info