Bedienungsanleitung Austria Email EKF series (Seite 35 von 36) (Deutsch, Englisch)

800546

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Id.Nr.: 123158-19

WARRANTY, GUARANTEE AND PRODUCT LIABILITY

Warranty is made according to the legal provisions of the Republic of Austria and the EU.

1. A condition for the operation of guarantee services by the product manufacturer (hereinafter referred to as the PM)

is the presentation of the paid invoice for the purchase of the device for which the guarantee service is being invo-

ked, whereby the identity of the device in terms of type and serial number must be taken from the invoice and must

be produced by the claimant. This is subject exclusively to the PM‘s general terms and conditions of business and

sales and delivery conditions.

2. To the extent required by law and/or the installation and operating instructions, the assembly, installation, connec-

tion and commissioning of the device in question must have been carried out by a licensed electrician and/or in-

staller with due regard to the necessary instructions for this. The storage tank (without external covering or plastic

external covering) must be protected from direct sunlight in order to prevent discolouring of the polyurethane foam

and any possible warping of plastic components.

3. The room in which the equipment is operated must be free of frost. The assembly of the equipment must be carried

out at a location which can be reasonably expected i.e. the equipment must be easily accessible and replaceable

in the event of necessary maintenance, repair and possible replacement. The costs for any necessary changes to

the structural conditions (e.g. doors and corridors too narrow) are not covered by the guarantee and warranty oe-

red and shall therefore be refused by the PM. When setting up, installing and operating the water heater in unusual

places (e.g. lofts, living quarters with water sensitive ooring, store rooms etc.) potential water leakage must be

taken into consideration and therefore a device for capturing and draining o any leaked water must be provided

in order to prevent secondary damage in the sense of the product liability provisions.

4. The warranty shall not apply in the following cases:

Improper transportation, normal wear and tear, deliberate damage or damage through negligence, any applicati-

on of force whatsoever, mechanical damage or damage due to frost or resulting from exceeding the operational

pressure stated on the rating plate even once, the use of connection ttings that do not comply with the applicable

standards or non-functioning storage tank connection ttings, as well as unsuitable and non-functioning operating

ttings, glass or plastic part breakage, any colour dierences, damage through improper use, particularly by failing

to observe the operating and assembly instructions (operating and installation instructions), damage caused by

external inuences, connection to the wrong voltage, corrosion damage due to aggressive waters not suitable as

drinking water in accordance with national guidelines (such as the Austrian Drinking Water Ordinance TWV – BGBI.

II no. 304/2001), Deviations of up to 10 K in the stated hot water temperature compared to the actual drinking

water temperature from the storage tank (hysteresis of the regulator and possible cooling as a result of pipelines),

continued use in spite of a defect, unauthorised modications to the device, installation of additional components

which have not been tested with the device, improperly performed repairs, insucient conductance of the water

(at least 150 S/cm), operational wear and tear of the magnesium anode (consumable part), natural limestone for-

mation, water deciency, re, ood, ooding, lightning strike, excess voltage, power failure and other force majeu-

re, use of non-original and third party components, e.g. heating rod, protective anode, thermostat, thermometer,

nned tube heat exchanger etc. components installed in a way that is non-insulated with regard to the storage

tank, inux of foreign material and electrochemical installations (e.g. mixing installations), non-observance of the

planning documents, late and non-documented renewal of the installed protective anode, faulty installation and

connection of the external current anode (e.g., no permanent power supply), lack or improper cleaning and opera-

tion as well as deviations from the standard, which only slightly impair the value or the functionality of the device.

Furthermore, the original installation at the place of assembly may not be altered or retrotted before an inspec-

tion by the manufacturer or a commissioned expert. Any changes to the original installation on site will result in

the immediate exclusion of all possible claims from the warranty or guarantee as well as product liability claims.

In addition, as a matter of basic principle, all regulations set out in ÖNORM B 2531, DIN 1988 (EN 806), DIN 1717,

VDI 2035 or the corresponding national regulations and legislation must be complied with.

5. In case of a justiable claim, this must be reported to the nearest PM customer services centre. They shall reserve

the right to decide whether a faulty component should be replaced or repaired and/or whether a faulty device will

be exchanged for a fault-free device of the same value. In addition the PM expressly reserves the right to demand

that the customer return the device to which the claim applies. The date of a repair or an exchange will be dened

by the producer within 5 days!

6. Repairs under the guarantee may only be carried out by people licensed to do so by the PM. Exchanged parts shall become

the property of PM. Should any repairs to the water heater be required following necessary service works these shall be

invoiced to the customer as repair and pro-rata materials costs.

Austria Email EKF series Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info