Bedienungsanleitung Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II (Seite 53 von 122) (Englisch)

815458

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Operating manual Fireplace inserts slied flat + II EN 7 | Requirements at the installation location

7 Requirements at the installation location

7.1 Requirements at the room of installation

Fireplaces must not be set up in:

• spaces in which the required combustion air supply is not guaranteed.

• spaces which are generally accessible, especially emergency exits staircases in residential building

with no more than 2 apartments are not included in general accessible spaces.

• spaces in which easily flammable or potentially explosive substances or mixtures are processed,

stored or manufactured.

• spaces, apartments or units from which air is extracted with the aid of ventilators, such as ventila-

tion- or hot-air heating installations, extractor hoods or exhaust air tumble dryers. Unless the safe

function of the fireplace insert is ensured:

This is ensured if:

– the systems only circulate air within a space.

– the systems have safety features which autonomously and reliably prevent negative pressure in

the installation space.

– simultaneous operation of the fireplace and the air-extracting system is prevented by safety

features.

– the flue gas routing is monitored by a particular piece of safety equipment.

– no negative pressure greater than 0.04 mbar occurs overall via the combustion air flow of the

fireplace insert and the volume flows of the ventilation systems in the installation room and

rooms connected via the ventilation network. This must also be guaranteed when easily access-

ible ventilation system control equipment is adjusted or removed.

TIP

When operating a controlled living room ventilation system, the use of a DIBT-tested heat-producing

appliance connected to a balanced flue is recommended.

7.2 Installing the fireplace insert

Observe the guidelines on fire safety, such as thermal insulation and air grille sizes.

DANGER

Fire hazard

Operating your Austroflamm fireplace insert with too high a fuel feed will create a risk of the chimney

and adjacent components or furniture overheating.

7.3 Combustion air supply

For heat-producing appliances that draw their combustion air from the installation room an adequate

supply of combustion air into the room must be provided. Other heat-producing appliances or ventila-

tion facilities in the installation room or combustion air network may make a separate combustion air

supply from outside necessary.

Air suction systems (e.g. ventilation system, cooker hood, etc.) that are operated together with the

heat-producing appliance in the same room air network may disrupt the combustion air supply and

possibly require additional safety measures under the heating regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info