Bedienungsanleitung Axis 214 PTZ - Network Camera (Seite 34 von 53) (Englisch)

615957

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

AXIS 214 PTZ

The domain name currently registered at the Axis Internet Dynamic DNS service for your product can be

removed at any time. To do this, click Settings... and follow the instructions.

For more information, please refer to the

online help.

Network - Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of

host names to IP addresses on your network.

Obtain DNS server address via DHCP - automati

cally use the DNS server settings provided by the DHCP

server. Click the View button to see the current settings.

Use the following DNS server address

- enter the desired DNS server by specifying the following:

• Doma

in name - enter the domain(s) to search for the host name used by the AXIS 214 PTZ.

Multiple domains can be separated by semicolons (;). The host name is always the first part of a

Fully Qualified Domain Name, e.g. myserver is the host name in the Fully Qualified Domain Name

myserver.mycompany.com where mycompany.com is the Domain name.

• Primary DNS server - enter the IP address of the primary DNS server.

• Secondary DNS server - will be used if the primary DNS server is unavailable.

NTP Configuration

The AXIS 214 PTZ can obtain the correct time from an

NTP server. The address for the NTP server can

either be obtained via the DHCP server, or it can be entered manually.

Host Name Configuration

The AXIS 214 PTZ can be accessed using a host name, instead of

an IP address. The host name is usually

the same as the assigned DNS Name. It is always the first part of a Fully Qualified Domain Name and is

always one word, with no period. For example, myserver is the host name in the Fully Qualified Domain

Name myserver.mycompany.com.

Enabling dynamic DNS updates allows you to alias a dynamic IP

address to a static host name, allowing

your computer to be more easily accessed from various locations on the Internet. Outside users can always

access your server using the associated DNS name regardless of the WAN IP. The DNS server used by the

user and/or the DNS server responsible for the domain in use must support RFC2136 and allow updates

from the camera.

The TTL

(Time To Live) value determines how long (in seconds) the reply from the DNS server should be

remembered when checking that the domain name for the registered IP address is still valid.

Link-Local IPv4 Address

Link-Local Address is enabled by default and

assigns the AXIS 214 PTZ with an additional IP address for

the UPnP protocol. The AXIS 214 PTZ can have both a Link-Local IP and a static/DHCP IP address at the

same time - these will not affect each other. See Network - UPnP™, on page

37.

HTTP

The default HTTP port number (80) can be changed to

any port within the range 1024-65535. This is useful

for e.g. simple security port mapping.

HTTPS

The default HTTPS port number (443) can be changed

to any port within the range 1024-65535. HTTPS is

used to provide encrypted web browsing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis 214 PTZ - Network Camera Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info