Bedienungsanleitung Axis 214 PTZ - Network Camera (Seite 35 von 53) (Englisch)

615957

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

AXIS 214 PTZ

NAT Traversal (port mapping)

A broadband router allows devices on a private network (LAN) to share a single connection to the Internet.

This is done by forwarding network traffic from the private network to the “outside” i.e. the Internet.

Security on the private network (LAN) is increased since most broadband routers are pre-configured to stop

any attempts to access the private network (LAN) from the public network/Internet.

Use NAT tra

versal when your AXIS 214 PTZ is located on an intranet (LAN) and you wish to make it

available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP

traffic to an external HTTP port in the NAT router will be forwarded to the camera.

Notes:

• For NAT traversal to work, this must also be supported by the broadband router.

• The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”,

“Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the AXIS 214 PTZ will attempt to configure port mapping in a NAT router

on your network, using UPnP™. Note that UPnP™ must be enabled in the camera (see System Options >

Network > UPnP).

Use manually selected NAT router

- Select this option to manually select a NAT router and enter the IP

address for the router in the field provided.

If a router is not manually specified, the AXIS 214 PTZ

will automatically search for NAT routers on your

network. If more than one router is found, the default router will be selected.

Alternative HTTP port

- Select this option to manually define an external HTTP port. Enter the port number

in the field provided. If no port number is entered here, a number will automatically be selected when NAT

traversal is enabled.

Notes:

• An alternative HTTP port number can be used/be active even if NAT traversal is disabled. This is useful if

e.g. your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT

router.

• If you attempt to manually enter a port number that is already in use, another available port number will

automatically be selected.

• When the port number is selected automatically it will be displayed in this field. This can be changed by

entering a new port number and clicking Save.

FTP

The FTP server running in the AXIS 214 PTZ enables the upload of new firmware,

and user applications.

Check the box to enable the service.

RTSP

The RTSP protocol allows a connecting

client to start an MPEG-4 stream. Enter the RTSP port number to

use. The default setting is 554.

Network Traffic

The default connection setting is Auto-negotiate, which

means that the correct speed is automatically

selected. If necessary, you can set the connection speed by selecting it from the drop-down list. 10BaseT

(Half/Full Duplex), 100BaseTX (Half/Full Duplex).

Maximum bandwidth - Specify, in Mbit/s

or Kbit/s, the maximum bandwidth that the AXIS 214 PTZ is

allowed to use on your network. This is a useful function when connecting the AXIS 214 PTZ to busy or

heavily loaded networks. The default setting is Unlimited. For more information, please refer to the online

help.

Network - SOCKS

SOCKS is a networking proxy protocol. The AXIS 214 PTZ can be configured to use a SOCKS server to reach

networks on the other side of a firewall/proxy server. This functionality is useful if the AXIS 214 PTZ is

located on a local network behind a firewall, but notifications, uploads, and alarms need to be sent to a

destination outside the local network (e.g. to the Internet).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis 214 PTZ - Network Camera Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info