Bedienungsanleitung BaByliss SH500E (Seite 11 von 72) (Alle Sprachen)

665401

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

18 19

LOCKING

The appliance has a Locking function that prevents the appliance from being switched on and

the buttons activated accidentally, for example during travel.

To activate the Locking function

Press and hold down the Parking button

until the Lock symbol  ashes.

The Locking function is activated.

Note: This may take approximately ten seconds.

The Parking symbol lights up.

The 3 combs will rise progressively.

The appliance head is unclipped and descends, bringing the combs with it.

The Lock symbol  ashes and the LED display screen turns o .

To deactivate the Locking function

Press and hold down the Parking

button until the display screen shows a 3 to 1 countdown;

the Lock symbol

 ashes and the cutting length and remaining use time are displayed.

The Locking function has now been deactivated. You can now use the appliance

again.

Note

• Locking is automatically deactivated when the appliance is placed in its stand.

• Locking can also be deactivated using the

button.

CHANGING THE CUTTING HEADS

In order to maintain the performance of your product, we recommend that you change the

cutting heads every year.

A kit of three cutting heads and the necessary tools is available for sale in shops or from the

BaByliss Customer Service department under BaByliss product code SH050E.

TROUBLESHOOTING

Problem Possible cause Solution

The LED screen display shows

“HI” or “LO”.

The adapter used is not suitable

to charge the appliance.

Check that you are using the adapter supplied with the

appliance to charge the appliance.

The LED screen display shows

“ER”.

A malfunction has occurred

while charging the appliance.

Remove the appliance from its stand for an hour.

If the problem continues, contact the BaByliss after-sales

service.

The LED display screen shows

the ﬂ ashing Cleaning symbol

when you press the

button.

The appliance has not been

cleaned after 15 minutes of

continuous use.

Press the Cleaning button

and clean the appliance as

described in the chapter on cleaning.

The appliance head does not

unclip after having pressed the

Cleaning button

or Parking

button

The automatic head-raising

mechanism of the appliance

activated by the Cleaning

button

or Parking button

is blocked by hair and

impurities.

You can lift the head manually using 2 ﬁ ngers to press

simultaneously on the notches on the front and back of

the appliance.

Then press the Cleaning button and place the

appliance head under running water as described in the

chapter on cleaning, or the Parking button

to store your

appliance correctly.

The appliance head lifts up

during use and the motor

stops.

The Cleaning

or Parking

button has been pressed

accidentally during use.

Press the Cleaning

or Parking button so that the

appliance returns to the desired position.

Note: if the appliance head has become unclipped, clip it

in again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BaByliss SH500E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info