Bedienungsanleitung Balay 3HW459X (Seite 10 von 32) (Englisch)

464024

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

You will see the cooking time counting down in the display.

When the cooking time has elapsed

A signal sounds.

Press the

0 button to cancel the signal before it sounds.

Open the appliance door and carefully remove the cookware

with oven gloves.

Press the

# button to switch off the appliance.

Changing the cooking time

Press the

0 button twice. Change the cooking time using the

rotary selector. The changed cooking time starts to count down.

Checking time settings

You can call up all settings using the

0 button.

Setting a later end time

Please remember that easily spoiled foods must not be allowed

to remain in the cooking compartment for too long.

A later end time can be set for

■ all types of heating

■ the microwave

Example: you put the dish in the cooking compartment at 9.30.

It takes 45 minutes to cook and will be ready at 10.15, but you

would like it to be ready at 12.45 instead.

Change the end time to 12.45. The oven goes into standby.

Cooking starts at 12.00 and finishes at 12.45.

This function is also available for the cleaning function. You can

shift the time of the cleaning operation so it is carried out at

night, which means that the appliance is available at all times

during the day.

Moving the end

Prerequisite: The selected operation has not begun yet, and a

cooking time has been set.

1. Press the 0 button repeatedly until the arrow is pointing to

the symbol for the end time:

yO.

The bars on the display show that the end time has not been

delayed.

2. Using the rotary selector, move the end time to later.

3. Confirm by pressing the @ button.

The setting is applied. The appliance is in standby mode,

the

yO End time is displayed.

Operation starts automatically at the appropriate time. In the

example, operation starts at 12.00 noon. The

xO cooking time

then counts down on the display.

The cooking time has elapsed.

A signal sounds. The oven stops heating. You can cancel the

signal earlier by pressing the

0 button.

Adjusting the end time

This is only possible if the oven is on standby. To do this, use

the

0 button to switch to yO End time and use the rotary

selector to correct the end time.

Cancelling the end time

This is only possible if the oven is on standby. To do this, use

the

0 button to switch toyO End time and turn the rotary

selector to the left until --:-- appears. The cooking time elapses

immediately.

Setting the clock

The oven must be switched off before you can set or change

the clock.

Following a power cut

After a power cut, 4 zeros will flash in the clock display and a

signal will sound.

1. Set the right time using the rotary selector.

2. Press the 0 button.

The time is applied.

Changing the clock

Example: changing from summer to winter time.

1. Press the0 button twice.

The arrow is next to the symbol for the clock

0O.

2. Change the time using the rotary selector.

3. Press the 0 button.

The new time is applied.

Hiding the clock

The current time appears in the display when the oven is

switched off. You can also hide the clock. Then it will only

appear when the oven is switched on. For more information,

refer to the Basic settings section.

Childproof lock

The oven has a childproof lock to prevent children from

switching it on by accident or changing an operation that is

already in progress.

Activating the childproof lock

Press and hold the

@ button for approximately four seconds

until the

@ symbol appears.

The childproof lock is switched on.

Releasing the lock

Press and hold the

@ button until the @ symbol goes out.

The childproof lock is switched off.

Note: Even if the childproof lock is active, you can still switch

off the oven with

#, set the timer and turn off the acoustic

signal.

After a power cut, the childproof lock will no longer be active.



LHI NJO

¡$



LHINJO

¡$



LHINJO

¡$

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Balay 3HW459X Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Balay 3HW459X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info