Bedienungsanleitung Balay 3HW459X (Seite 15 von 32) (Englisch)

464024

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Note: Always remove the new halogen bulb from the packaging

using a dry cloth. This increases the service life of the bulb.

Method

1.Switch off the circuit breaker in the fuse box.

2.Place a tea towel in the cold oven to prevent damage.

3.Remove the glass cover. To do so, prise open the glass

cover at the bottom by hand.

Should you experience difficulties removing the glass cover,

use a spoon to help. (Fig. A)

4.Remove the bulb and replace with a bulb of the same type.

(Fig. B)

5.Refit the glass cover. (Fig. C)

6.Remove the tea towel. Switch the circuit breaker in the fuse

box back on or plug in the mains plug.

Glass cover

You must replace a damaged glass cover. Suitable glass

covers may be obtained from the after-sales service. Please

specify the E number and FD number of your appliance.

Replacing the door seal

If the door seal is defective, it must be replaced. Replacement

seals for your appliance can be obtained from the after-sales

service. Please supply your appliance's E number and FD

number.

ã=Risk of serious damage to health.!

Never use the appliance if the door seal is damaged.

Microwave energy may escape. Do not use the appliance again

until it has been repaired.

1.Open the oven door.

2.Remove the old door seal.

3.There are 5 hooks attached to the door seal. Use these

hooks to attach the new seal to the oven door.

Note: The presence of the join at the bottom of the door seal in

the centre is technically required.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found in the oven. You can make a note of the number of

your appliance and the telephone number of the after-sales

service in the space below to save time should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.

This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.

Group 2 means that microwaves are produced for the purpose

of heating food. Class B states that the appliance is suitable for

private households.

Energy and environment tips

Here you can find tips on how to save energy when baking and

roasting and how to dispose of your appliance properly.

Saving energy

Only preheat the oven if this is specified in the recipe or in the

operating instruction tables.

E no.

FD no.

After-sales service O

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Balay 3HW459X Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Balay 3HW459X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info