Bedienungsanleitung Bang Olufsen BeoVision Avant 85 - 2016 (Seite 53 von 120) (Englisch)

704893

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Loudness boost

The loudness function increases the level of the low- and high-frequency content as the

volume level is decreased. The maximum amount of level increase in bass and treble can

be set under Bass max and treble max.

Note that Loudness boost will only have effect if Loudness in the Sound menu is

activated.

Spatial control

The spatial control function allows you to adjust many aspects of the perceived sound,

including surround settings, stage width, envelopment and more.

Balance and Fader: Re-direct input signal to different output channels in your

speaker setup. For example, adjusting the balance l/r all the way to the left will

direct all the signals only to the speakers in your setup that have a speaker role

on the left (that is left front, left surround, etc.) and adjusting the fader b/f all the

way to the left will direct all the signals only to the speakers in your setup that

have speaker roles as rear speakers (that is right back, left back, etc.).

Processing: In many cases, the number of input channels in the audio signal does

not match the number of loudspeakers in your configuration. For example, you

may have two speakers, but the input signal is from a 7.1-channel Blu-ray. In this

case, the signal is "downmixed" to the two speakers and you can hear all the

components of the signal. To do this, you must select Downmix. Conversely, you

may have a large system with seven main speakers and a subwoofer (7.1 channel

system) and you would like to distribute the two channels from a CD to all

speakers. In this case, the signal must be "upmixed" to all speakers. True

image is the processor that accomplishes these tasks dynamically. If you select

the setting 1:1 instead, the signals are passed directly through to the speakers.

Surround: Determines the balance between the sound stage (in the front) and

the surround information from the True Image processor. Note that the surround

controller has no effect on the signal when Processing is set to 1:1 or Downmix.

Height: This setting determines the level of the feed to all loudspeakers in your

configuration with a “height” speaker role. It will have no effect on other

loudspeakers in your system. If the controller is set to minimum, then no signal

will be sent to the “height” loudspeakers. Note that, if the LFE input to

ceiling setting in the Speaker groups menu is Yes, then the height control will

determine the level of the ceiling loudspeaker. In this case, to ensure that the

ceiling loudspeaker is calibrated to the correct level, the Height setting should

be set to maximum.

Stage width: Determines the width of the front images in the sound stage. At a

minimum setting, the images will collapse to the centre of the front. At a

maximum setting, images will be pushed to the sides of the front sound stage.

This allows you to control the perceived width of a band or music ensemble

without affecting the information in the surround and back speakers.

Envelopment: This allows you to set the desired amount of perceived width or

spaciousness from your surround and back loudspeakers. At its minimum

setting, the surround information will appear to collapse to a centre back

location.

Dynamics control

Many soundtracks and music recordings have a very wide dynamic range. This means

that there is a very large difference between the quietest and loudest moments.

Consequently, if you set your volume level to be able to hear the quiet sections, the loud

sections become very loud. With Dynamics control option you can reduce the difference

by making the quiet sound louder and the loud sound quieter.

Compression: TV advertisements are typically much louder than the programme

they interrupt, and movies often have large differences between the quietest

and loudest moments. Consequently, the Compression feature allows the

television to reduce (or compress) the dynamic range of audio signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen BeoVision Avant 85 - 2016 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen BeoVision Avant 85 - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info