Bedienungsanleitung Bang Olufsen BeoVision Avant 85 - 2016 (Seite 77 von 120) (Englisch)

704893

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

6. Select Update Digital Channels, then select Next.

7. Select Start to update the digital channels. This can take a few minutes.

8. Select Done when updating has completed.

Reinstall channels

You can reinstall all channels and leave all other TV settings untouched. If a pincode is

set, you will need to enter this code before you can reinstall channels.

1. Press , highlight Settings and press the centre button.

2. Highlight Channels and press .

3. Highlight Antenna/Cable Installation and press the centre button.

4. Enter your child lock pin code if necessary.

5. Select Search for Channels, then select Start.

6. Select Reinstall Channels, then select Next.

7. Select your country, then select Next.

8. Select the type of installation you want, Antenna (DVB-T) or Cable (DVB-C).

9. Select Next.

10. Select the type of channels you want, Digital and Analogue Channels or Only

Digital Channels.

11. Select Next.

12. Select Start to search for channels. This can take a few minutes.

13. Press  to go back one step or press  to leave the menu.

You can perform a full TV installation. The television is completely reinstalled. For

information on reinstallation of your television, press the red button in the on-screen

help and find 'Reinstall your television'.

DVB-T or DVB-C

DVB-T or DVB-C reception

During the channel installation, just before you search for channels, you select Antenna

(DVB-T) or Cable (DVB-C). Antenna DVB-T searches for terrestrial analogue channels

and digital DVB-T/T2 channels. Cable DVB-C searches for analogue and digital channels

available from a cable DVB-C provider.

DVB-C channel installation

For ease of use, all DVB-C settings are set to automatic. On some markets, the television

can enter the network ID of the provider automatically. If the DVB-C installation fails,

restart the installation and enter the network ID and/or network frequency values you

have received from the DVB-C provider when the television asks for them during the

installation. If your provider does not use Network ID, you should select Full Scan under

Frequency Scan in the DVB settings menu.

Channel number conflicts

On some markets, different TV channels (broadcasters) may have the same channel

number. While installing, the television shows the list with channel number conflicts. You

need to select which TV channel you want to install on a channel number with multiple

TV channels.

DVB settings

Network Frequency Mode: If you intend to use the fast Quick Scan method in

Frequency Scan to search for channels, select Automatic. The television will use

one of the predefined network frequencies (or HC - homing channel) as used by

most cable providers in your country. If you have received a specific network

frequency value to search for channels, select Manual.

Network Frequency: With the Network Frequency Mode set to Manual, you can

enter the network frequency value received from your cable provider here. To

enter the value, use the number buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen BeoVision Avant 85 - 2016 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen BeoVision Avant 85 - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info