Bedienungsanleitung Bang Olufsen BeoVision Avant 85 - 2016 (Seite 79 von 120) (Englisch)

704893

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Satellite installation

You can install or update tuned satellite channels which, for example, have been moved

by the broadcaster. Follow on-screen instructions.

Install satellites

This television has two built-in satellite DVB-S/DVB-S2 tuners.

You can install up to four satellites (four LNBs) on the television. Select the exact number

of satellites you wish to install at the start of the installation. This will speed up the

installation.

Unicable

You can use a Unicable system to connect the antenna dish to the television. You can

select Unicable for one or for two satellites at the start of the installation.

Start the installation

Make sure your satellite dish is connected correctly and is perfectly aligned before you

start the installation.

1. Press , highlight Settings and press the centre button.

2. Highlight Channels and press .

3. Highlight Satellite Installation and press the centre button.

4. Enter your child lock pin code if necessary.

5. Select Search for Satellite.

6. Select One Tuner or Two Tuners. The television has 2 built-in satellite tuners.

Make your selection according to how many satellite dish cables you have

available.

7. Select Next.*

8. Select Search. The television will search for the satellites available on the

alignment of your antenna dish. This may take a few minutes. If a satellite is

found, its name and reception strength are shown on-screen.

9. If the television shows the satellite(s) you want, select Install. If the television

does not find the satellite(s) you expect to find, the dish alignment may be

altered or a cable may be disconnected. You can select Search Again.

10. If a satellite offers Channel Packages, the television will show the available

packages for that satellite. Select the package you need.

11. Select Next. Some packages offer a Quick or Full install for their available

channels, select one or the other. The TV will install the satellite channels and

radio stations.

12. To save the satellite setup and installed channels and radio stations, select

Finish.

*Before you start searching for satellites, you can change or check the installation

settings. See Satellite installation settings in this chapter.

Satellite installation settings

The satellite installation settings are preset according to your country. These settings

determine how the television searches and installs satellites and its channels. You can

always change these settings if you start the satellite installation and follow on-screen

instructions. On the screen where you can start searching for satellites, you can also

make settings for satellite installation.

You can select the number of satellites you want to install or select one of the Unicable

systems. When you select Unicable, you can choose the User band numbers and enter

the User band frequencies for each tuner.

Homing Transponder and LNB: On some markets, you can adjust the advanced

settings for homing transponder and each LNB. Only use or change these

settings when a normal installation fails. If you have a non-standard

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen BeoVision Avant 85 - 2016 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen BeoVision Avant 85 - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info