Bedienungsanleitung Batavia BT-CRH001 - 7062511 (Seite 6 von 17) (Deutsch, Englisch, Holländisch, Französisch)

758257

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

English

10 11

English

DEAR CUSTOMERS

Instruction manuals provide valuable hints

for using your new device. They enable you

to use all functions, and they help you avoid

misunderstandings and prevent damage.

Please take the time to read this manual

carefully and keep it for future reference.

EXPLANATION OF THE SYMBOLS

Warning! To reduce the risk of injury,

the user must read the instruction

manual.

Denotes risk of personal injury, loss

of life or damage to the tool in case

of non-observance of the

instructions in this manual.

Always wear hearing protection. The

effects of noise can cause hearing

loss.

Wear safety glasses. When working

with electric power tools, sparks,

splinters, chips and dust particles

may be generated and these can

cause loss of sight.

Electric power tool, protection class

II. This sign symbolises that this unit

corresponds to Protection Class II.

This means that the unit is equipped

with either reinforced or double

insulation between the mains circuit

and output voltage or metal housing

respectively.

CE stands for “Conformité

Européenne”, which means “In

accordance with EU Regulations”.

With the CE marking, the

manufacturer conrms that this

Electric tool complies with the

applicable European directives.

Do not dispose of electric power

tools with domestic refuse.

SAFETY INSTRUCTIONS FOR CORDLESS

DRILL/DRIVERS

General

• The tool/charger is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the tool/

charger by a person responsible for their

safety.

• Ensure that children do not play with the

tool/charger.

• Ensure that the Forward/Reverse switch

(6) is in the middle (locking) position before

making any adjustments or changing

accessories as well as when carrying or

storing the tool.

• Do not work materials containing asbestos

(asbestos is considered carcinogenic)

• Dust from material such as paint contain-

ing lead, some wood species, minerals

and metal may be harmful (contact with or

inhalation of the dust may cause allergic

reactions and/or respiratory diseases to

the operator or bystanders); wear a dust

mask and work with a dust extraction

device when connectable.

• Certain kinds of dust are classied as

carcinogenic (such as oak and beech

dust) especially in conjunction with addi-

tives for wood conditioning; wear a dust

mask and work with a dust extraction

device when connectable.

• Follow the dust-related national require-

ments for the materials you want to work

with.

• When using the drill, use safety equipment

including safety glasses or shield, ear

defenders, and protective clothing includ-

ing safety gloves. Wear respiratory protec-

tion suitable for the work being under-

taken. A minimum rating of FFP2 is recom-

mended. If operating the tool causes dis-

comfort in any way, stop immediately and

review your method of use.

• Battery chargers are for indoors use only.

Ensure that the power supply and charger

are protected against moisture at all times.

• Ensure that the lighting is adequate.

• Ensure that the drill bit is securely xed in

the chuck. Insecure drill bits can be

ejected from the machine causing a

hazard.

• Ensure that the drill bit is not in contact

with the workpiece prior to starting up the

tool.

• Before drilling, check that there is suf-

cient clearance for the drill bit under the

workpiece.

• Drill bits get hot during operation, allow to

cool prior to handling them.

• NEVER use your hands to remove saw-

dust, chips or waste close by the bit.

• Examine the chuck regularly for signs of

wear or damage. Have damaged parts

repaired by a qualied service centre.

• ALWAYS wait until the drill has come to a

complete stop before putting it down.

ADDITIONAL SAFETY FOR SDS PLUS

DRILLS

WARNING: If you suspect or discover

asbestos is present in any area you are

working seek professional advice immediately.

Removal of asbestos should be carried out by

a licensed contractor. Contact the HSE in the

UK (www.hse.gov.uk) or your national health

and safety authority in your country for further

information about dealing with asbestos.

European Directive 2009/148/EC provides

additional information related to exposure to

asbestos at work.

• It is imperative to follow all national safety

regulations concerning the type of work

being undertaken.

• Do not allow anyone under the age of 18

years to use this tool, and ensure that

operators are qualied and familiar with

the operating and safety instructions.

• Masonry drilling or chiselling can create

sharp particles that will impact the

operator. Wear impact-resistant safety

glasses and protective clothing, including

safety boots.

• Core drills should only be used with SDS

drills featuring a safety clutch to prevent

jamming, which could cause an injury to

the operator.

• If the safety clutch operates during use,

quickly release the trigger and remove the

core drill or bit from the masonry surface

being drilled. Do not continue work until

the cause of the safety clutch operating is

understood.

• Do not operate SDS drills whilst up a

ladder or in any location where there is a

risk of falling. SDS drills are heavy and

produce strong vibration and high torque

in use.

• Wear suitable protective anti-vibration

gloves that are non-fabric or coated fabric

to prevent loose strands of material

catching in the rotating drill bit. Discard

gloves immediately if material is visibly

frayed.

• Drilling can produce large volumes of dust

and debris that may be toxic. Wear

respiratory protection suitable for the work

being undertaken. A minimum rating of

FFP2 is recommended.

• SDS drills produce high volumes of noise

and suitable ear protection must be worn

at all times while operating the tool.

• SDS drills produce a very high level of

vibration when operating in hammer or

chisel mode. Frequent breaks are advised.

• Only use SDS Chisels or Points with SDS

drills that can disengage rotary drilling

mode.

• Use metal and voltage detectors to locate

concealed electric, water or gas lines.

Avoid touching live components or

conductors.

• Extension cable reels used with this tool

must be completely unwound. Minimum

conductor cross section: 1.25mm2.

• Extension reels used outside should be

designed for outdoor use and should

feature water-protected sockets and

correct cable insulation.

• When using an SDS drill outdoors, an

RCD device must be used either by

connecting to a socket which incorporates

an RCD, or through use of an inline RCD.

• Ensure that the chisel or drill bit is securely

xed in the chuck before operating the

tool. Insecure drill bits can be ejected from

the machine, causing a hazard.

• Ensure lighting is adequate.

• Use both hands when operating this tool.

Batavia BT-CRH001 - 7062511 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info