Bedienungsanleitung Batavia BT-CS015 - 7062848 (Seite 9 von 50) (Deutsch, Englisch, Holländisch, Französisch)

758290

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

English

c. When restarting a saw in the work-

piece, centre the saw blade in the kerf

and check that saw teeth are not

engaged into the material. If saw blade

is binding, it may walk up or kickback

from the workpiece as the saw is

restarted.

d. Support large panels to minimise the

risk of blade pinching and kickback.

Large panels tend to sag under their

own weight. Supports must be placed

under the panel on both sides, near the

line of cut and near the edge of the

panel.

e. Do not use dull or damaged blades.

Unsharpened or improperly set blades

produce narrow kerf causing excessive

friction, blade binding and kickback.

f. Blade depth and bevel adjusting lock-

ing levers must be tight and secure

before making cut. If blade adjustment

shifts while cutting, it may cause bind-

ing and kickback.

g. Use extra caution when sawing into

existing walls or other blind areas. The

protruding blade may cut objects that

can cause kickback.

3.4 Lower guard function

a. Check lower guard for proper closing

before each use. Do not operate the

saw if lower guard does not move

freely and close instantly. Never clamp

or tie the lower guard into the open

position. If saw is accidentally dropped,

lower guard may be bent. Raise the

lower guard with the retracting handle

and make sure it moves freely and does

not touch the blade or any other part, in

all angles and depths of cut.

b. Check the operation of the lower

guard spring. If the guard and the

spring are not operating properly, they

must be serviced before use. Lower

guard may operate sluggishly due to

damaged parts, gummy deposits, or a

build-up of debris.

c. Lower guard may be retracted manu-

ally only for special cuts such as

“plunge cuts” and “compound cuts”.

Raise lower guard by retracting handle

and as soon as blade enters the mate-

rial, the lower guard must be released.

For all other sawing, the lower guard

should operate automatically.

d. Always observe that the lower guard is

covering the blade before placing saw

down on bench or floor. An unpro-

tected, coasting blade will cause the

saw to walk backwards, cutting what-

ever is in its path. Be aware of the time

it takes for the blade to stop after switch

is released.

3.5 Additional circular saw safety

a. Do not allow anyone under the age of 18

years to operate this saw.

b. When operating the saw, use safety

equipment including safety goggles or

shield, ear protection, dust mask and

protective clothing including safety

gloves.

c. Hand-held power tools may produce

vibration. Vibration can cause disease.

Gloves may help to maintain blood

circulation in the ngers. Hand-held

tools should not be used for long peri-

ods without a break.

d. Whenever possible, use a vacuum dust

extraction system to control dust/

waste.

e. Do not attempt to cut material thicker

than detailed in the Specications sec-

tion of this manual.

f. Adjust the cutting depth to the thick-

ness of the workpiece i.e. less than a

full tooth of the blade should be visible

below the workpiece.

g. Ensure work is correctly supported.

Large panels may sag under their own

weight and bind the saw blade. Sup-

ports must be placed under the panel

on both sides, close to the line of cut

and near the edge of the panel.

h. Ensure all supports and power cables

are completely clear of the cutting path.

i. Always secure the workpiece to a stable

platform, ensuring body exposure is

minimised, avoiding blade binding, or

loss of control.

j. Always stand at an angle to the tool

when operating.

7062848-Circular_Saw_1400W-Ma-1803-19.indb 7 20-03-18 10:39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CS015 - 7062848 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info