Bedienungsanleitung Batavia BT-CT001 - 7063419 (Seite 11 von 46) (Deutsch, Englisch, Holländisch, Französisch)

758282

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

• Damage to hearing if no suitable ear

protection is used.

• Damage to health resulting from hand-

arm vibrations if the electric power tool

is used over a long period of time, or is

incorrectly operated or maintained.

• Warning! These electric power tools



operation. Under certain circum-

-

tion of active or passive medical

implants. In order to reduce the danger

of serious or fatal injuries, we recom-

mend that persons with medical

implants consult their doctor and the

manufacturer of the medical implant

before operating the electric power tool.

8. Electrical safety

Always check that the voltage of

the power supply corresponds to

the voltage on the rating plate.

• Do not use the machine if the mains

cable or the mains plug is damaged.

• Only use extension cables that are suit-

able for the power rating of the machine

with a minimum thickness of 1.5 mm2.

If you use a extension cable reel, always

fully unroll the cable.

9. Before the rst use

Remove the machine and all accessories

from the package. Keep the packaging

materials out of the reach of small children.

There is a danger of suffocation!

10. Contents of packing

1× Multifunction tool

1× Flexible shaft

1× Auxiliary handle

1× 190 pcs. accessory-set

1× Storage case

1× Instruction manual

11. Intended use

The multifunction tool is a high quality,

compact machine which is suitable for an

enormous number of different applications

for drilling, cutting, grinding and brushing

thanks to its extensive range of

accessories.

12. Use

12.1 Replacing the collet

(See g. A)

Before assembly always remove

the plug from the mains!

Three size collets (3.2mm / 2.4mm /

1.6mm) are available to accommodate the

different shank sizes.

Always use the collet that matches the

shank size of the accessory you plan to use.

Do not force a larger diameter shank into a

smaller collet.

• Press the spindle lock button (4) and

turn the collet nut (2) counter clockwise

with the supplied wrench.

• Remove the collet nut (2) and collet

(12), and insert one appropriately-sized

collet into the spindle.

• Reinstall the collet nut (2)

Do not over-tighten the collet nut when

there is no accessory in the collet.

• Release the spindle lock button (4).

12.2 Installation and replacement of

accessories

Before assembly always remove

the plug from the mains!

Warning! Change accessories by inserting

an accessory into the collet as far possible

to minimize run out and unbalance.

• Press the spindle lock button (4) and

turn the collet nut (2) counter clockwise

with the supplied wrench.

• Insert the mandrel of the accessory into

the collet that matches the shank size

of the accessory.

• Use the wrench to turn the collet nut

clockwise until lightly tightened. Do not

over-tighten.

• Release the spindle lock button.

7062854-Compact-Tool-170W-Ma-1803-27.indb 9 14-05-18 10:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CT001 - 7063419 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info