758285
8
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
English
6
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended
could result in a hazardous situation.
2.5 Service
a. Please use a qualied expert who uses
original replacement parts to repair
your power tool. This will ensure proper
functioning of the power tool.
3. Additional safety warnings for
reciprocating saws
Do not work materials containing
asbestos. Asbestos is considered
carcinogenic.
Wear safety goggles, hearing protection
and if necessary other protective
means, such as safety gloves, safety
shoes, etc.
Before use, remove all nails and other
metal objects from the workpiece.
Make sure that the workpiece is prop-
erly supported or xed.
Do not use the machine without the
guard.
Inspect the saw blade before each use.
Do not use saw blades which are bent,
cracked, or otherwise damaged.
Make sure that the saw blade is prop-
erly mounted.
Only use saw blades that are suitable
for use with the machine.
Only use saw blades with the correct
dimensions.
Do not use other accessories than saw
blades.
Do not use saw blades made of HSS
steel.
Do not use the machine on workpieces
requiring a maximum sawing depth that
exceeds the maximum sawing depth of
the saw blade.
Hold the machine by the insulated grip-
ping surfaces where the saw blade may
contact hidden wiring or the mains
cable. If the saw blade contacts a ‚live‘
wire, the exposed metal parts of the
machine can also become ‚live‘. Risk of
electric shock.
Let the machine run at no load in a safe
area after mounting the saw blade. If
the machine vibrates strongly, immedi-
ately switch off the machine, remove
the mains plug from the mains, and try
to solve the problem.
Beware that the saw blade continues to
rotate for a short period after switching
off the machine. Do not attempt to
bring the saw blade to a standstill
yourself.
3.1 Kickback
Kickback is the upward and backward
movement of the saw blade when the saw
blade unexpectedly touches an object.
Securely hold the machine with both hands
during use. Keep your attention focused on
the operation.
Kickback is usually caused by:
unintentionally touching hard objects or
materials with the rotating saw blade;
a blunt saw blade;
a saw blade that is not properly
mounted;
sawing into a previous cut;
a lack of attention to the operation;
an instable stance.
4. Electrical safety
Always check that the voltage of
the power supply corresponds to
the voltage on the rating plate.
Do not use the machine if the mains
cable or the mains plug is damaged.
Only use extension cables that are suit-
able for the power rating of the machine
with a minimum thickness of 1.5 mm2.
If you use a extension cable reel, always
fully unroll the cable.
5. Before the rst use
Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!
7062850-Reciprocating_Saw-Ma-1801-08.indb 6 19-03-18 11:09
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Batavia BT-RS004 - 7062850 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info